What are your Homelab goals for 2025?

Submitted ⁨⁨3⁩ ⁨days⁩ ago⁩ by ⁨Sunny@slrpnk.net⁩ to ⁨selfhosted@lemmy.world⁩

Personally will be trying to transform my server which is currently in a fractal R5 case, into a small-ish Homelab rack, combined with all my network equipment. Will require complete relocation of all network equipment in the house as well as cables so it will be a bit of a project. Also on the lookout for a good quality rack so let me know if you have any recs. Still unsure if u want to do full width rack or mini. Part of me really want the UDM Pro from Unifi…

What are your goals and thing you want to accomplish during 2025?

source

Comments

Sort:hotnew top

tofuwabohu@slrpnk.net ⁨8⁩ ⁨minutes⁩ ago
Most important: replace the raspi SD card with an SSD

General hardware: see if I find a better solution than my current Proxmox box (repurposed desktop which consumes 60w idling but is capped to 16GB Ram)

Incoming traffic: currently having a VM that runs nothing but nginx and certbot. Considering switching to another reverse proxy and, more important, get proper monitoring of the logs (e.g. IP detection, 403, etc)

Maybe add some iam like authentik

Finding a solution for selfhosting podcasts client with sync on Android and Linux… gpodder never really seemed to work, considering audiobookshelf.

Probably setting up calibre web and gethomepage

Keeping what I have and maybe optimize a bit:

Prometheus stack

plenty exporters

Nextcloud

paperless

home assistant, mosquitto

pihole

vaultwarden

selfoss

On VPS:

Mastodon

Bookwyrm

some WordPress (want to move this to my homeserver as well)
source
traches@sh.itjust.works ⁨3⁩ ⁨days⁩ ago
Got a 3 year old kid with another on the way. I just need it to be reliable so the kid can watch Sesame Street and the lights keep working.

source
LovableSidekick@lemmy.world ⁨1⁩ ⁨day⁩ ago
Might get around to tidying this 20-year-old mess up a bit - tho I’m not sure where to start lol.

Image

source
- TwoBeeSan@lemmy.world ⁨1⁩ ⁨day⁩ ago
  I appreciate you posting your balls like this.
  
  Fuck it it works. Lol
  
  source
mat@linux.community ⁨3⁩ ⁨days⁩ ago
I want to move my whole server to NixOS. It’s gotten to the point where I have no idea where all the Ubuntu config files went, and handling half of it via Docker vs baremetal. I hope this will allow me to set up proper backups as well, and maybe get better at Nix! I started a few days ago using the VM feature, but it’s tricky to work on for now, perhaps I haven’t found the right workflow.

source
- xamino@feddit.org ⁨3⁩ ⁨days⁩ ago
  I went this route from the start and love it. In case you need some resources:
  
  VimJoyer is excellent: www.youtube.com/watch?v=a67Sv4Mbxmc
  
  Do secrets using SOPS: www.youtube.com/watch?v=G5f6GC7SnhU
  
  NixOS and Restic are an amazing combination, full backups in 20 lines of config. This article was my best find for this: francis.begyn.be/blog/nixos-restic-backups . Tip: you can easily write systemd services to trigger each software’s preferred backup strategy and simply schedule them to run before the Restic backup - I game them all copy the backups to one folder that then Restic backs up, works great for me!
  
  Hope this helps a bit. I found the effort to be very worth it, but took me almost half a year to get comfortable with it.
  
  source
  - Kushan@lemmy.world ⁨3⁩ ⁨days⁩ ago
    Another vote for restic, best backup software I’ve ever used.
    
    source
  - mat@linux.community ⁨3⁩ ⁨days⁩ ago
    Thank you! It definitely does, I will be using that Restic article for sure! I actually use NixOS on my main laptop, which I found via Vimjoyer’s videos. It’s great, though I wish documentation for more advanced usage was more readily available. I started making the server, currently my biggest roadblock is testing the infrastructure without going live (I made the flake generate a VM for now but it takes a long time to build it every edit and I can’t even get ssh working) and figuring out how I’ll eventually install it with minimal downtime.
    
    source
    -> View More Comments
- v3ritas@infosec.pub ⁨3⁩ ⁨days⁩ ago
  Is there a reason(s) you’re doing NixOS over something like ProxMox? A friend of mine has been moving his lab over to ProxMox containers so i was thinking to do the same thing, but curious about NixOS since I’ve seen a few people mention it. Thanks!
  
  source
  - rumba@lemmy.zip ⁨3⁩ ⁨days⁩ ago
    The entirety of Nix configuration is in somewhere between 1 and 3 files depending on how you like your poison.
    
    It’s immutable, so stuff can’t just change on you.
    
    Every change you make is stored into a new configuration and you can roll back to any configuration you’ve ever done with a reboot, so it’s kind of hard to brick it.
    
    Apps can’t just go in and modify your users or your host table or any of the other configs so it’s got an extra layer of security. But then, the package system has more packages than God and is maintained by a million randos with very little oversight.
    
    It has some substantially neat tricks. I moved from one box to another by just doing a fresh install, moving its three configuration files and letting syncthing rebuild my home directory from my other box.
    
    I think, if I were going to use Nix as a home server, I just install all of the services directly on the OS. Updates and configurations for everything would be maintained by Nix itself.
    
    source
  - Auli@lemmy.ca ⁨3⁩ ⁨days⁩ ago
    Nix is great if your fine with the packages and configuration they provide. If you want other stuff or features not provided it is a giant pain in the ass and not worth it.
    
    source
- Auli@lemmy.ca ⁨3⁩ ⁨days⁩ ago
  Tried it didn’t like it. To much work to get somethings working. Went back to docker.
  
  source
OpossumOnKeyboard@lemmy.world ⁨2⁩ ⁨days⁩ ago
Actually have a decent backup system and data repetition

source
- Tinkerer@lemmy.ca ⁨2⁩ ⁨days⁩ ago
  This, my ssd randomly disappeared on my proxmox server January 1st so I had to start from scratch. Didn’t have any docker compose backups or lxc backups… I suppose this time I can do everything right now lol
  
  source
  - Appoxo@lemmy.dbzer0.com ⁨2⁩ ⁨days⁩ ago
    Do git :)
    
    source
daniskarma@lemmy.dbzer0.com ⁨2⁩ ⁨days⁩ ago
Buying a 16 TB hard drive for… purposes.

source
- Fuck_u_spez_@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
  You can say piracy here, it’s a safe space. Or, ya know, porn.
  
  source
alsimoneau@lemmy.ca ⁨3⁩ ⁨days⁩ ago
Start setting one up.

source
- ScandalFan85@feddit.org ⁨3⁩ ⁨days⁩ ago
  Have fun!
  
  source
y0kai@lemmy.dbzer0.com ⁨2⁩ ⁨days⁩ ago
Learn how to design an implement effective segmentation for my network, get better with OPNsense, and get my private website up and running

source
- acceptable_pumpkin@lemmy.world ⁨2⁩ ⁨days⁩ ago
  I had a blast learning and configuring vlans for my smart switch and putting all the IOT devices on their own network.
  
  source
MonkCanatella@sh.itjust.works ⁨3⁩ ⁨days⁩ ago
get around cgnat finally

source
- Sunny@slrpnk.net ⁨3⁩ ⁨days⁩ ago
  Tailscale? 👉👈 🥺
  
  source
  - MonkCanatella@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
    That’s what I’m currently using and it doesn’t cut it, especially for streaming movies
    
    source
- couch1potato@lemmy.dbzer0.com ⁨2⁩ ⁨days⁩ ago
  Literally just finished configuring headscale on a free (pay as you go) oracle vps because I’m behind cgnat. Getting tailscale on pfsense to connect to a headscale server was a chore but finally got it.
  
  source
  - MonkCanatella@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
    I’m using tailscale now and yeah, their relay servers are very spotty. I do have an ampere free tier just sitting around that i was planning to use as a relay for an overlay network, but that’s all been in the planning phase all year.
    
    source
- slazer2au@lemmy.world ⁨3⁩ ⁨days⁩ ago
  New provider, VPS, or CloudFlare tunnels.
  
  source
Strit@lemmy.linuxuserspace.show ⁨3⁩ ⁨days⁩ ago
I think what I need to do correctly on my homelab this year, is setup off-site backups. I currently only backup to seperate drives and machines inside my own home. I need to setup something at my parents place to take weekly and monthly backups.

Other than that, my media server needs a bigger storage drive.

source
- muntedcrocodile@lemm.ee ⁨3⁩ ⁨days⁩ ago
  I got no backups ao ur doing better than me. If 1 ssd dies there goes all my data.
  
  source
- Sunny@slrpnk.net ⁨3⁩ ⁨days⁩ ago
  Backups are key! Need to work on this myself too!
  
  source
- Disaster@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
  I snagged an old fiber LTO5 drive… just got to work out how to get it powered and then spend hours fiddling with silly old tapes.
  
  source
- chunkystyles@sopuli.xyz ⁨3⁩ ⁨days⁩ ago
  I did this recently. Opendrive is free up to 5 gb and works with rclone. All I’m backing up is the config and data needed to recreate my containerized services. I’ve even had to recreate them from the backup, once.
  
  source
RogueBanana@lemmy.zip ⁨2⁩ ⁨days⁩ ago
Finally get a cheap mini PC so I can stop running my gaming rig 24/7 for jellyfin. Looking to start self hosting few other services if that goes well.

source
quixotic120@lemmy.world ⁨3⁩ ⁨days⁩ ago
Moving to a rack is nice, I love my rack. If you’re in or near a city I suggest keeping an eye on Craigslist and ebay (search by distance nearest and lowball ones that have been sitting for months) because it’s not uncommon for nice racks to go real cheap as long as you come get them. I got my rack realllll cheap ($40, 42u, fully enclosed with massive pdu) because it’s a 90s ibm rack and it’s welded steel so it’s like 450lbs. Moving it was a nightmare but it’s real sturdy and I’m never moving it again now that it’s in my basement

For my goals in the short term I have to replace a sas cable that caused a crc error on one drive, it only happened once per smart data but still want to get that done asap. I also have another drive that’s beginning to show some smart issues; it’s on the same sas cable so it may be related because the errors didn’t increase (they all were related to an unclean shutdown, confusing things) but it’s old anyway so better safe than sorry I guess.

Medium term I want to finally upgrade my ups. The one I have now is not a rack mount which is part of what led to the unclean shutdown. It’s also a bit undersized. I have a generator for my house so I don’t need something massive but the one I have is 450va and several years old so with the tired battery I only can get about 5m of runtime. It’s more than enough to cover the transfer from power cutting out to generator power but I want something that’s a bit more reliable in case of generator failure. This is pricey though because my array is pretty huge so it’ll probably be held off unless I find a good deal on a dead one that has cheap batteries available

I also want to put the rack on its own circuit. This is something I should do asap because it’s cheap, just gotta find time and rearrange my panel a bit because it’s pretty full. This would be the other part of the unclean shutdown as the outlet would be in a much better location and I could also install a locking outlet

Would also be nice to pick up a super cheap monitor locally, like something for $15-20 from a pawn shop or Craigslist or something for the rack. Earlier this year I had nginx crash on my server and the webui became inaccessible, I had to drag my nice and kind of large desktop monitor down to the basement to solve the issue, would be nice to just have a shitty small monitor on the rack for that

Speaking of nginx I keep meaning to setup some kind of reverse proxy or mdns for all my dockers so that I can just do whatever.whatever instead ipaddress:3993 which makes my password managers barf but I’ll probably just be lazy and edit my hosts file

Longer term I want to add a secondary low power server that can run something like pfsense to handle my routing, then turn my current wireless routers into access points because they kind of suck as routers.

And of course the array could always be bigger, especially if drive prices fall

I will probably realistically only do the drive and cable replacement, the circuit thing since that’ll be like $40 and a half hour of work, the monitor if I can find one, and maybe the hosts file thing. If I run into cash (unlikely) or a crazy deal (you never know) the ups would be my next priority but there’s a million other things going in life (deductibles just reset for health insurance, hooray)

source
- dogma11@lemmy.world ⁨3⁩ ⁨days⁩ ago
  Nginx is pretty simple to run as a reverse proxy. Caddy is even easier but not as scalable. HAProxy looks intimidating at first but it’s pretty easy and very scalable and performant. Wendell from Level1Techs has a nice writeup on their forums
  
  source
- colebrodine@midwest.social ⁨3⁩ ⁨days⁩ ago
  “I’m never moving it again…”. As a larger guy that owns a pickup truck, I wish I had a nickel for everytime I heard that about a big rack I help move. (Or a baby grand piano, pool table, or gun safe) :)
  
  source
- Disaster@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
  ipvlan / macvlan containers?
  
  source
- pezhore@infosec.pub ⁨3⁩ ⁨days⁩ ago
  For the nginx reverse proxy - that’s how I ran things prior to moving to microk8s. If you want I can dig out some config examples. The trick for me was to set up host based stanzas, then update my internal DNS to have A records for each docker service pointing to the same docker host.
  
  With Kubes + external-dns + nginx ingress, I can just do a deployment/service/ingress and things automatically work now.
  
  source
Muninn@lemmy.dbzer0.com ⁨3⁩ ⁨days⁩ ago
I want to replace my single drive Qnap NAS by a diy one. It still works, but I also want to redo my backup process, and it would be a good point to start.

source
- 9488fcea02a9@sh.itjust.works ⁨3⁩ ⁨days⁩ ago
  Omg… I have the EXACT same goal. Qnap and make a better offsite backup process… Been procrastinating for years now
  
  I’m thinking a diy NAS running openmediavault.
  
  Currently doing encrypted backups to google storage archive tier. Very cheap to store, expensive to retrieve.
  
  Thinking maybe i can set up a small box at a family members house for nightly backups
  
  source
sugar_in_your_tea@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
don’t break stuff

upgrade to microOS from Leap, without violating step 1

reduce the physical footprint of my server (currently in a massive case, would like to go to mini-ITX)
source
isolatedscotch@discuss.tchncs.de ⁨1⁩ ⁨day⁩ ago
docker-ify everything, my nginx, nextcloud, pihole, jellyfin, and basically everything else is a nightmare and I can’t even begin to understand how to modify the shit that ~~2023 me did~~ 2023 chatgpt spat out, so having everything in some neat docker composes is gonna help immensly

also making the Pi that everything’s hosted on boot of an SSD instead of a cheap chinese SD card, but that requires money and I’m all out

source
- Passerby6497@lemmy.world ⁨1⁩ ⁨day⁩ ago
  I docker’d all of my systems a few years ago, and I’m so glad I did. So much easier to manage, and when I lost a system I was able to get most of my services back up and running with minimal configuration on a VM same day.
  
  As for hardware, you might check and see if you’ve got a local reseller of retired business equipment. Before I moved, I had a place I went to from my work that accepted shit we were getting rid of that disposed of stuff and resold at a bargin the stuff that was still good. I got more than one hp tower from a few years previous that ran (and still runs) like a champ. Felt like night and day when I upgraded to that from my Pi setup.
  
  source
hubobes@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
Moving my servers to Arch (EOS) as my trial for one during 2024 was successful, rock solid. Swapping my router to a Unifi Express as I am switching to an ISP which finally allows me to do so.

source
- y0kai@lemmy.dbzer0.com ⁨2⁩ ⁨days⁩ ago
  What is the advantage of an arch based server over Debian ?
  
  source
  - hubobes@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
    I had the unfortunate experience thaf major upgrades on Debian did break the system twice alreay (different servers though). Doing small, incremental package upgrades seems like less of a risk, I can more easily track major package upgrades.
    
    Also it is my homelab, not a production environment, a place where I try new things and play around. So curiosity is always a reason as to why I do things as well.
    
    source
tychosmoose@lemm.ee ⁨3⁩ ⁨days⁩ ago
To start - moving services from bare metal to rootless Podman containers running via quadlets. It’s something I have had in mind for a while but keep second guessing the distro choice. Long-ish release cadence, systemd-networkd and a recent Podman version in the native repos, well supported, and not Ubuntu.

So far openSUSE Leap seems like the winner. A testing machine is up to install everything, write some deployment scripts, and decide on a storage layout and partitioning scheme.

If anyone has another distro to recommend that checks these boxes let me know!

I like rolling release for the desktop, but only want critical patches in any given month for this server, and a major upgrade no more than every 3-4 years. Or an immutable server distro. But it doesn’t seem like networkd is an option for the ones I’ve looked at (Fedora CoreOS, openSUSE MicroOS), and I am not sure if I want to figure out Ignition/Combustion right now.

Next project - VLANs on Mikrotik.

OP - Navepoint makes good racks for reasonable money. I have a Pro series 9u from them and it went together without any problems. It’s on the wall with a pretty big ups in it.

source
- Sunny@slrpnk.net ⁨3⁩ ⁨days⁩ ago
  Thanks for the recommendation!
  
  If I hadn’t been using Unraid for my server I too think I’d be rocking OpenSuse, but probably MicroOS as you mentioned.
  
  source
rroa@reddthat.com ⁨2⁩ ⁨days⁩ ago
Deprecate the Raspberry Pi entry point for incoming traffic, move to NUC instead.

Switch from PiHole to Adguard

Move IoT equipment to separate VLAN
source
- somerandomname@lemmy.ml ⁨2⁩ ⁨days⁩ ago
  What are the reasons for the Pi Hole to Adguatd switch?
  
  source
  - modus@lemmy.world ⁨1⁩ ⁨day⁩ ago
    I have the same question. It seems like a step backwards.
    
    source
    -> View More Comments
Fedegenerate@lemmynsfw.com ⁨2⁩ ⁨days⁩ ago
Get a domain and set about moving over to HTTPS with Let’s encrypt and Nginx.

Learn to write an Nginx config. NPM just works so good though.

Fix my permission issues. I have my media zpool on 777 so all the LXCs work and I have to run Libation in a VM as root. I’ve been banging my head against this on and off for a while.

Figure out why paperless isn’t saving to the correct place. Also, figure out where Paperless is saving to.

Containerise Libation.

I give friends and family access to my server via a relay, just a raspberry pi 0 with Tailscale, pihole and nginx on it. I have reasons for going this route. Anyways, get a couple more of those into the wild. Also streamline the process somewhat.

source
- tht@social.pwned.page ⁨1⁩ ⁨day⁩ ago
  Why not caddy?
  
  source
  - Fedegenerate@lemmynsfw.com ⁨1⁩ ⁨day⁩ ago
    Momentum really. I’m on NPM now, it works and it’s great. I didn’t much thought into it. I’m generally happy with npm, it’s mostly just something to learn next and plain nginx made sense.
    
    source
- Jakeroxs@sh.itjust.works ⁨2⁩ ⁨days⁩ ago
  Check out traefik as an alternative to nginx or npm
  
  source
polographer@lemm.ee ⁨3⁩ ⁨days⁩ ago
10gb network, a second proxmox host and outside backup

Thank you, I didn’t realize I needed goals

source
Juvyn00b@lemmy.world ⁨2⁩ ⁨days⁩ ago
I have a dual socket R620 with 256gb RAM that I never turn on (proxmox) and another box with a single xeon 1518d (esxi). Collapsing both down to a repurposed Sophos SG135 (atom c3558) with 32g ram, 512gb sata and a noctua fan (proxmox). I already use another sg135 running opnsense. I run mostly lightweight loads anymore (HomeAssistant, netbox, unifi controller) so I really don’t need things turned on that have overkill horsepower. I have a separate file server that I need to upgrade sometime (old 4 core bulldozer amd) but it keeps chugging away.

source
muntedcrocodile@lemm.ee ⁨3⁩ ⁨days⁩ ago
Hardware perspective i need a nas. I got myself some piece of acer oem thats not too shit just need a case and some drives (i dont wanna just make stack of drives on top of the stack of old oems i call a homelab).

Am getting starlink installed cos shitty rural aussie internet is shit. So gonna have to do some fucking around to make that work.

Would like some local media reccommendation algorithm (can probs just write some code to dump jellyfin into openwebui and task an llm).

Gotta set up an image gen ai and hook that up to openwebui.

Gotta set up an email server to make authelia notifications not just dumped to a file.

Ohh and i got literaly no backups of anything (well except my docker composes that are on git).

Other than that we will see what i want.

source
c2c2@lemmy.world ⁨1⁩ ⁨day⁩ ago
Goals: keep it running

source
rumba@lemmy.zip ⁨3⁩ ⁨days⁩ ago
Replace Blue Iris with Frigate + Coral

Set up Immich with proper backups

Set up Peertube

Increase my storage pool to fit 100% of my local backups.

Nearline my critical backups

Move my remote backups from BackBlaze to synctoy untrusted crypt on a pie at work.

source
- dogma11@lemmy.world ⁨3⁩ ⁨days⁩ ago
  Frigate and a Coral TPU work amazing. I’ve had them and Home Assistant setup for the last year or so and have been quite happy.
  
  source
  - rumba@lemmy.zip ⁨3⁩ ⁨days⁩ ago
    I’m honestly very excited I bought the coral about 2 months ago and it’s just been sitting there. I even loaded proxmox on a laptop with a decent GPU. I’m just so sick of alerts every time headlights flash up in my driveway or a cloud goes over…
    
    source
FoD@startrek.website ⁨2⁩ ⁨days⁩ ago
My server is exactly as I need. Basically 1 year old now. This year I really want to do vlans to control the network more than an off the shelf router. I work in tech and still am struggling because all I know is meraki bullshit and that’s not priced for the typical home user.

I’ll need a few AP’s and a switch and firewall. I don’t know what to get or what to buy and each research session ends with more options than I started with. Anyway that’s my goal. I’ll get there eventually.

source
madjo@feddit.nl ⁨1⁩ ⁨day⁩ ago
Add some redundancy to it.

Find a way to copy my iCloud files to Nextcloud.

source
skimm@lemmy.sdf.org ⁨1⁩ ⁨day⁩ ago
Migrate from Unraid in a massive tower to a proper JBOD rig in a rack. Finally set up ARM SBC k8s cluster for most things alongside the old x86 hardware for a few services and running the NAS as I don’t know how I’d hook that up to the SBCs.

source
vividspecter@lemm.ee ⁨2⁩ ⁨days⁩ ago
Thinking about setting up a NixOS or Guix firewall/router. I like OpenWRT but upgrades are a bit annoying, although should improve with the new packaging system.

The idea of having a single config file I can deploy on new hardware almost immediately is very appealing, however.

source
- tht@social.pwned.page ⁨1⁩ ⁨day⁩ ago
  NixOS is really good
  
  source
spookedintownsville@lemmy.world ⁨2⁩ ⁨days⁩ ago
Right now it’s really just setting up DNScrypt, and maybe swapping some equipment out for lower power consumption.

source
tooclose104@lemmy.ca ⁨3⁩ ⁨days⁩ ago
Transition my main host to Linux, maybe Plex to Jellyfin, setup a switch (have an RS900 and access to acquire a free CS2960), a UPS or two. I may also wind up getting my hands on some PoE cameras and APs. Run some cable too.

source
- Sunny@slrpnk.net ⁨3⁩ ⁨days⁩ ago
  Nice dude! Jellyfin has defo been a nice change for me which i switched to during 2024.
  
  source
  - tooclose104@lemmy.ca ⁨2⁩ ⁨days⁩ ago
    I don’t really need all the fluff that Plex has but the only thing holding me back is no PS5 support.
    
    source

-> View More Comments