- Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
- Dual 4Kp60 HDMI® display output with HDR support 4Kp60 HEVC decoder
- LPDDR4X-4267 SDRAM (4GB and 8GB SKUs available at launch)
- Dual-band 802.11ac Wi-Fi®
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- microSD card slot, with support for high-speed SDR104 mode
- 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 × USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
- 2 × 4-lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
- 5V/5A DC power via USB-C, with Power Delivery support
- Raspberry Pi standard 40-pin header
- Real-time clock (RTC), powered from external battery
- Power button
Looking forward to finding one in a store right around the time the RPi 6 is released.
orclev@lemmy.world 1 year ago
I’ve got to wonder, am I the only one that wishes these things came with PoE support out of the box without needing an addon? I can’t even find a competitor that supports PoE without needing an extra PoE HAT.
towerful@programming.dev 1 year ago
Tbh, POE isn’t a feature most people need. And it’s quite expensive, takes up a lot of room, and generates quite a bit of heat.
You can get inline POE extractors that spit out 5v usb/jack or 12 jack. I use them quite a lot, and they are much cheaper than PoE hats
orclev@lemmy.world 1 year ago
Yeah I just hate all the extra clutter the extractor adds. It’s really nice to just run some cat 6 to a Pi and call it a day. If I could spend an extra $50 to get a Pi or Pi-like device that came with PoE built in I would in a heartbeat.
anlumo@lemmy.world 1 year ago
PoE runs on 48V, it’s nontrivial to get that down to levels usable by a microprocessor.
orclev@lemmy.world 1 year ago
It’s not free, but it’s not really that hard either. You can even get fancy and use isolated power for some extra safety.
I’d like to see some more specialized versions of these boards. For instance one that trades the MIPI ports (which I have literally never found a use for) for PoE or some other feature that’s more useful in a networking centric use case. In many cases I’d even be willing to give up a USB port for that.
InvertedParallax@lemm.ee 1 year ago
It’s really not, you have a buck reg on board already, it’s just the peripherals that need 5v and for a lot of that you can use linear regs.
Cobrachicken@lemmy.world 1 year ago
Olimex had a ARM board with POE, if I remember correctly… though I cannot find it atm. Here’s an ESP based instead: https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware