Submitted 3 weeks ago by needanke@feddit.org to selfhosted@lemmy.world
https://feddit.org/pictrs/image/2ac396ea-ddbc-461a-a747-169b08641644.png
The sensor is located on the case (not near the exhaust) of the server. With the structure of my appartment this is the only place I can realistically put my Server but sadly also the hottest place in my appartment.
30.8 to 31.5……that’s nothing at all. What am I missing here?
31.5°C also is just a bit slower at cooling, and computer devices easily reach 95°C without any troubles.
Yeah this temperature is nothing. Regularly gets over 40 degrees Celsius where I am, and all of my home servers have run 24/7 through it without issue, not in air conditioning.
Hard drives don’t really like high temperatures for extended periods of time. Google did some research on this way back when. Failure rates start going up at an average temperature of 35 °C and become significantly higher if the HDD is operated beyond 40°C for much of its life. That’s HDD temperature, not ambient.
The same applies to low temperatures. The ideal temperature range seems to be between 20 °C and 35 °C.
Mind you, we’re talking “going from a 5% AFR to a 15% AFR for drives that saw constant heavy use in a datacenter for three years”. Your regular home server with a modest I/O load is probably going to see much less in terms of HDD wear. Still, heat amplifies that wear.
I’m not too concerned myself despite the fact that my server’s HDD temps are all somewhere between 41 and 44. At 30 °C ambient there’s not much better I can do and the HDDs spend most of their time idling anyway.
My server is in a closet without ventilation. You will probably be fine.
My server rack is located in an uninsulated attic with two tiny windows. I haven’t measured the ambient temperature but I think it’s over 40°C. Yesterday one drive in my storage server reached 65°C - so for today I have shut it off until the rain comes. Fun times.
Ouch, I will defenelty check on the system temps once I get home. Although I can’t really shut the whole thing off, maybe I can at least spin down the drive pool and kill all containers relying on that.
The hardware in your server should be able to handle 50-60 degrees for a long period of time, so going to 35 ambiant shouldn’t be a problem.
Exactly! My drives are all sitting at about 40°C but they’ll get up to 50°C at the hottest.
I run a fan because I have it in a wall mounted case but when I had it on a shelf it wasn’t actively cooled and never got higher than it does now.
It is in our basement though and it’s only ever gotten to 27°C down there a few times and that was without A/C.
Not worrying temps for most stuff. If you have mechanical HDDs you may want to check those specifically.
My server has also not been liking the heat over the past month
Though in my case it’s because drive 3 is sitting in a slot that is possibly not getting enough airflow. It’s consistently running a bit hotter than the other drives in the system.
I really should get around to moving it to a different slot.
Been happening to me as well. And my basement is more cool than my 1st and 2nd floor.
If that’s the flur just imagine how high the cerling is
Flur means hallway (it is at the ceiling)
My router (shit one provided by the carrier) is restarting frequently, I think due to overheating
How did you get your drive temps into home assistant?
If you feel particularly nerdy and love stats and graphs, here’s a rabbit hole for you
Oh nee :((
It’s a Synology NAS so will work with the Synology DSM integration: www.home-assistant.io/integrations/synology_dsm
There’s definitely ways to poll the sensors of other devices though. I had some janky sensors set up before for monitoring a standard Linux box.
My Pi spends all of its time around 55°C in a 20-25°C room. Main server idles at 47°C. Those aren’t worrying temps.
Yeah I know my desktop is idling around 60. Yet I’d rather have it a bit less warm on the passively cooled device ;)
My passiv cooled Pi5 (case as radiator) with HA is at 44°C (room is at 33°C). Idk how hot it gets on a regular basis, I just enabled the system monitor integration right now.
I mean with CPU temps, thermal throttling starts usually at 80°C, so nothing to worry.
Just yesterday I took measures to keep temp down further, powersave cpu governor, always full fan speed, 12 disks go to sleep after 60 min of inactivity. My NAS/server is in the attic and today theres 37°C outside
12 disks go to sleep after 60 min of inactivity
That will kill your drives far sooner than a temperature spike. load/unload cycles is one of the biggest HDD killers.
I hobestly don’t know how much of this temperature is the server and how much is just it beeing in a badly ventilated spot under the ceiling.
no issues with temps here in the UK, but the fans don’t sound happy…
Guess it might be benefitting from fans though 😄
I had a tower that generated so much heat that during a particularly hot summer, I had to stop using it around 1-2pm every day. The room just got too hot to occupy. I’m a computer nerd, so this was particularly heinous for me.
hottest day in what seemed like forever was here on Monday. Stayed away from studio/office as the heat was just unbearable! Im in the UK and it was around 32 outside and 35 in office as the 4-node heat generator was making a racket!
Computer says: “touch grass, or burn”
The computer fan with a 9V battery it is.
That and my trusty Jinbei house clothing
:sweat-smile: intensifies
For the rack in the closet, I cut a 4" duct off the ac, and piped it into the top of the closet. For one of my computers, it seemed to always run hot, so I bought two 6" box fans and mounted one over each of the two CPU. I have a little gadget that comes with Open Hardware Monitor so I can keep an eye on it. Currently running 100 freedom degrees, but it will fluctuate +/- 10 degrees depending on load. The only downside is they are a bit noisy, not extremely, but you can hear them buzzing away keeping shit cool so I don’t complain much and just turn the music up. LOL
This is the temperature right now (8:50am local time), I will comment again at 3:00pm xd Normally the ambient temperature here is over 40°C.
How is the cpu below ambient temperature?
Had the AC on in my room. It’s off since morning.
truxnell@aussie.zone 3 weeks ago
0.7C increase isn’t anything to write home about?
boonhet@sopuli.xyz 3 weeks ago
Well that’s the ambient temperature graph I think. Wonder how the CPU temperature is affected. Is it also just a 0.7C increase or maybe more?
needanke@feddit.org 3 weeks ago
This is less about the increase during the last 24 hours and more about the currend temp+expected increase.
errer@lemmy.world 3 weeks ago
I’ll make you feel better: here’s a server of mine that lives in a hot garage. Sorry for the freedom units but it peaks at about 55C.
Image
ms_lane@lemmy.world 2 weeks ago
My fileserver regularly ‘enjoys’ 45-50c during the day when I’m not home in summer.
Aircon isn’t cheap to run, so everythings getting fried while I’m at work (getting fried since we don’t have AC at work)