If it works, it works...

Comments

• Prismo@lemmy.world ⁨7⁩ ⁨months⁩ ago

  This really summarises the passive aggressive level you get to with a 3D printer: “Lift off the bed now you little fucker!”

  source
• j4k3@lemmy.world ⁨7⁩ ⁨months⁩ ago

  You must have been really close to the end for that to work. I’ve tried many hacks but few really work for me in-situ for more that a dozen layers.

  source

  • 4lan@lemmy.world ⁨7⁩ ⁨months⁩ ago

    There wasn’t much left and nothing that would collide with it. Seemed to work well enough

    I usually use glue stick but just ran out

    source

    • Imgonnatrythis@sh.itjust.works ⁨7⁩ ⁨months⁩ ago

      Usually? Like for routine pla prints? I’ve found myself having to do this (man I love magigoo) but the masses say I really shouldn’t have to. Kinda validating if this is actually a thing.

      source

      • -> View More Comments
    • CmdrShepard@lemmy.one ⁨7⁩ ⁨months⁩ ago

      Have you tried hairspray? I definitely prefer it as it’s easy to put on and gives nice, even coverage.

      source
• i_simp_4_tedcruz@lemmy.world ⁨7⁩ ⁨months⁩ ago

  Have they not invented blue painters tape where you’re from?

  source
• sj_zero ⁨7⁩ ⁨months⁩ ago

  Printing din rail?

  • 4lan@lemmy.world ⁨7⁩ ⁨months⁩ ago

    It’s an LED strip diffuser, this is the mount part

    source
• ArcaneSlime@lemmy.dbzer0.com ⁨7⁩ ⁨months⁩ ago

  I oddly usually have the other problem, my prints stick too good, the bottom of the print is white (though it is black PLA+) and it sometimes deforms my magnetic mat doohickey. Drives me crazy.

  source

  • CmdrShepard@lemmy.one ⁨7⁩ ⁨months⁩ ago

    Your extruder might be set too low.

    source

    • ArcaneSlime@lemmy.dbzer0.com ⁨7⁩ ⁨months⁩ ago

      I’ll try turning it up, iirc I have been running like 220° for PLA+.

      source

      • -> View More Comments
• user1234@lemmynsfw.com ⁨7⁩ ⁨months⁩ ago

  Though skeptical about trying it at first, I’ve found that Aquanet hairspray works amazingly on those creality glass beds. Keeps PLA on, and prevents PETG from bonding.

  source
• Kolanaki@yiffit.net ⁨7⁩ ⁨months⁩ ago

  Ever since it was suggested to rub glue stick over the print bed beforehand, I have had a single issue with raising bits of my prints.

  source
• Prismo@lemmy.world ⁨7⁩ ⁨months⁩ ago

  I also found a huge difference between filaments. Creality was terrible for me, Reflow is great

  source
• hostops@sh.itjust.works ⁨7⁩ ⁨months⁩ ago

  I had a huge problem with lifting edges. But since I bought Dimafix Spray all of my issues are gone. I also use brim with increased size to ger near perfect result. I print ABS.

  source

  • 4lan@lemmy.world ⁨7⁩ ⁨months⁩ ago

    I usually use glue stick and never have issues but I just ran out.
    Brims are a good idea for the meantime though

    This is only PlA+ so it should be behaving with a heated bed alone

    source
  • evidences@lemmy.world ⁨7⁩ ⁨months⁩ ago

    I’ve only done 3 prints with abs but I used a g10 plate and it worked fabulously. I heard one of the damn prints pop off the plate with a snap when the bed dropped below 60c, that was wild to me.

    source