Prismo

@Prismo@lemmy.world

• ⁨Comment⁩ on ⁨What would you like to see in a house IT setup?⁩ ⁨⁨8⁩ ⁨months⁩ ago⁩:

  At least one cat 6 ethernet in each room. Multiple outlets in any media room. One of my old houses had speaker jacks in each corner of the room which was a godsend when setting up surround sound for a home cinema setup.

• ⁨Comment⁩ on ⁨A Chinese Humanoid Just Broke the Robot Speed Record—and Now It's a Race Against Time⁩ ⁨⁨9⁩ ⁨months⁩ ago⁩:

  Here’s a Piped link to the video in the article:

  piped.video/watch?v=83ShvgtyFAg

• ⁨Comment⁩ on ⁨If it works, it works...⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  I also found a huge difference between filaments. Creality was terrible for me, Reflow is great

• ⁨Comment⁩ on ⁨If it works, it works...⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  This really summarises the passive aggressive level you get to with a 3D printer: “Lift off the bed now you little fucker!”

• ⁨Comment⁩ on ⁨Possible over extrusion, any advice appreciated!⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  So a combination of three changes finally got me back the correct result.

  1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
  2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
  3. Reduced the temp by 10°C apart from the first layer.

  Thanks for your help!

• ⁨Comment⁩ on ⁨Possible over extrusion, any advice appreciated!⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  So a combination of three changes finally got me back the correct result.

  1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
  2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
  3. Reduced the temp by 10°C apart from the first layer.

  Thanks for your help!

• ⁨Comment⁩ on ⁨Possible over extrusion, any advice appreciated!⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  So a combination of three changes finally got me back the correct result.

  1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
  2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
  3. Reduced the temp by 10°C apart from the first layer.

  Thanks for your help!

• ⁨Comment⁩ on ⁨Possible over extrusion, any advice appreciated!⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  I will check that, I hope its that as that would be an easy fix. Also I only use matte filament.

• ⁨Comment⁩ on ⁨Possible over extrusion, any advice appreciated!⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  When you say pressure of the z-axis, do you know what they meant exactly? Not sure it could be temp as it’s the same, however I did change the part cooling fan in case that was faulty and the material wasn’t cooling fast enough

• Possible over extrusion, any advice appreciated!i.imgur.com ↗
  Submitted ⁨⁨1⁩ ⁨year⁩ ago⁩ to ⁨3dprinting@lemmy.world⁩ | ⁨8⁩ ⁨comments⁩
• ⁨Comment⁩ on ⁨Epic Games to update Unreal Engine pricing for devs not making games⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  Traditional I would be working on a freelance basis with companies and teams that would only use adobe, and wanted files in those formats. Though as I’m doing more and more of work just for myself the alternatives are getting more tempting.

• ⁨Comment⁩ on ⁨Epic Games to update Unreal Engine pricing for devs not making games⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  Yeh, I use 4 applications from Adobe in very limited amounts. I wish they did a pay as you use subscription! If you use them all every day it’s cheap, but I maybe use them about 10-15 hours per month at the most.

• ⁨Comment⁩ on ⁨[Survey] Can you tell which images are AI generated?⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  Nice try robots! I’m not helping you learn how to fool us humans.