Comment on [deleted]

stevedice@sh.itjust.works ⁨1⁩ ⁨day⁩ ago

• DrunkAnRoot@sh.itjust.works ⁨1⁩ ⁨day⁩ ago

  what about clean fingers

  source

  • musubibreakfast@lemmy.world ⁨1⁩ ⁨day⁩ ago

    Perfectly fine unless you’re dating Edward Scissor Hands.

    source

    • thermal_shock@lemmy.world ⁨18⁩ ⁨hours⁩ ago

      Bobby Hammerfist

      source

      • TigerAce@lemmy.dbzer0.com ⁨17⁩ ⁨hours⁩ ago

        Freddy Kruger

        source
• trum_pam_pam@lemmy.world ⁨1⁩ ⁨day⁩ ago

  Thanks mom

  source
• TigerAce@lemmy.dbzer0.com ⁨17⁩ ⁨hours⁩ ago

  ABS plastic too? So I can print my own dildo? Sweet! Printing with ABS produces toxic fumes though, I wouldn’t want to put that inside of me. Maybe the ABS would technically be safe but you don’t know if they added other chemicals which aren’t safe. I wouldn’t go for plastic in general, as it produces micro plastics. Just stick with the other materials you mentioned, but also with those there can be bad chemicals used. So only trust the products of proper stores and don’t order toys on temu or aliexpress, or any other Chinese website.

  source

  • CucumberFetish@lemmy.dbzer0.com ⁨16⁩ ⁨hours⁩ ago

    3D printed items are unsuitable for food purposes, doesn’t matter with which end you’ll eat them. The layer lines aren’t perfectly sealed so they are very porous, allowing all kinds of nasties to grow in them.

    With ABS you might be able to fix it with an acetone bath to re-melt the top layer, but I haven’t checked.

    source

    • TigerAce@lemmy.dbzer0.com ⁨15⁩ ⁨hours⁩ ago

      There is food-safe filament for 3D printers but it isn’t ABS. I just wouldn’t do it at all, indeed like you said for the layer lines creating perfect spots for bacteria. But also because most of the filaments or plastic used for filaments are made in China and they tend to use harmful chemicals to cheap out on production or their machines are covered in bad chemicals for lubrication for example, ending up in/on your filament.

      source
    • Postmortal_Pop@lemmy.world ⁨10⁩ ⁨hours⁩ ago

      So you can fix this by using a 1:4 slurry of abs and acetone. You’ll want to do a minimum of 3 dips and allow it to cure in a heated print chamber for at lest 16 hours but preferably 24. Also important, Reinforce the layers by either printing parallel to the angle of use or by attaching the print to a sturdier material, you wouldn’t want it to break across layer lines in use.

      source
  • stevedice@sh.itjust.works ⁨10⁩ ⁨hours⁩ ago

    Well, self-made is a whole different beast. And yes, always buy from reputable brands.

    source
• elephantium@lemmy.world ⁨20⁩ ⁨hours⁩ ago

  silicone, glass, abs

  Why do I have Huntrix songs running through my head all of a sudden?

  source

  • dragonbringerx@lemmy.world ⁨18⁩ ⁨hours⁩ ago

    “bout to hit you with these vibes…”

    source
• okmko@lemmy.world ⁨18⁩ ⁨hours⁩ ago

  Okay but what if I want to be inside it?

  source

  • stevedice@sh.itjust.works ⁨7⁩ ⁨hours⁩ ago

    No idea on fleshlights. I’d assume they’re generally safer since having stuff on is almost never as bad as having it in you but I have no evidence to back this up. It’s kind of a moot point since I can’t imagine putting your dick into one of the safe materials is something anybody would wanna do.

    source
  • ZILtoid1991@lemmy.world ⁨18⁩ ⁨hours⁩ ago

    Micro fetishes are only feasible in fiction.

    source

    • RVGamer06@sh.itjust.works ⁨16⁩ ⁨hours⁩ ago

      And VR, i guess

      source

      • ZILtoid1991@lemmy.world ⁨16⁩ ⁨hours⁩ ago

        Which is technically fiction, but okay.

        source
    • okmko@lemmy.world ⁨17⁩ ⁨hours⁩ ago

      🤣

      Sounds like I need a 10"with three balls

      source
• pixeltree@lemmy.blahaj.zone ⁨9⁩ ⁨hours⁩ ago

  Don’t use PVC, ABS, TPE or TPU anally! They’ll give you ass cancer

  source

  • stevedice@sh.itjust.works ⁨8⁩ ⁨hours⁩ ago

    ABS can be safe if from a reputable brand but yeah, it’s probably better to just avoid it all together.

    source
• ZILtoid1991@lemmy.world ⁨18⁩ ⁨hours⁩ ago

  PET also does not leak stuff, but the HDPE and highly porous caps make it only suitable if no alternatives are present. Some cosmetics have smaller and thick-walled PET bottles, so if you-re in a dire need, you can use them without the “filling them with water” trick even.

  source