Submitted 1 year ago by Koopa_Khan@lemmy.world to 3dprinting@lemmy.world
Hi everyone!
I’m curious to know which slicer you guys use.
I’ve been using the Creality slicer, but it seems like it pretty consistently crashes, and I’ve tried Cura but the print seemed stringy despite using the same settings.
How are Orca or Prusa?
PrusaSlicer
I had some issues early on with Cura and switched to Prusa, and it’s always worked well for me.
Orcaslicer
Preach, best of all worlds
Another vote for prusa here. The recently added organic supports are really awesome. It’s enabled me to print some things I previously would not have attempted.
Lychee free version bc fuck renting licenses
Another Orca user here. Started off with PrusaSlicer and switched over at a friend’s recommendation, and honestly am so glad I did (it has a much nicer UI and some really neat features ported over from SuperSlicer).
I used Cura for a few years, then I tried Prusa and my print quality dramatically improved for reasons I have not figured out.
Haha this is exactly my experience. Pusaslicer/superslicer just make such better prints for me and I have no idea why. Despite putting so much effort into my Cura settings, Prusa just prints better out of the box with so little effort.
Cura, I’ve gone back to Prusa periodically but it has too many features hidden behind simple buttons or percentage sliders for me.
I used Cura about 5 years ago and my experience then was actually the inverse, especially in regards to slicing settings. There were tons of settings buried all over the GUI and you really had to dig for them.
I used KISSSlicer for a while and got into PrusaSlicer. They all seem to have their struggles from time to time. Maybe I’ll try out Cura again the next time I run into a wall.
By default all the settings are hidden, it’s annoying, but you can show all of them in the settings and then it has a bunch more that I can find equivalents to in Prusa.
Prusa and SuperSlicer.
SuperSlicer, nightly builds from GitHub.
Nightly builds with commits that happen sporadically every few months it seems 😭.
That said, it looks like some action happened since my last build. I’ll have to see if the cone slicing thing is fixed…
I’ve almost always used PrusaSlicer just because the only printers I had access to were mk3s+.
I’ve started playing with Cura though because A. i wanted some more complex prints that PrusaSlicer struggled to support, and B. We also got some creality cr-30’s functional at my college again. So far I still feel Prusa is easier but that’s likely just familiarity.
Cura and my self programmed vase mode slicer
Cura. Works for me.
Prusaslicer
Whichever one works. I switch between Cura and PS. I’m not skilled enough to figure out the differences. I make small adjustments here and there, but IDK what I’m doing. My last print had over extrusion on the top surface, but not the walls, so I switched from Cura to PS and it works now.
Cura has always been my go-to because we used it back in my high school drafting class and I haven't tried anything else since then...
Cura but only because I haven’t tried the others yet.
Prusaslicer. For resin I combine it with UVtools
I’ve only used cura (no particular reason, just what was shown to me and I now know how to use it
However, I’ve heard good things about both prusa and klipper
Klipper is not a slicer. It’s a replacement firmware for the printer.
Makerware. Been trying cura but it’s not cooperating with my printer entirely.
New Lemmy Post: Which slicer do you use (https://lemmy.world/post/9450344)
Tagging: #3dprinting
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
helenslunch@feddit.nl 1 year ago
I use Cura for no reason other than it’s simply the most popular, and easiest to find help with 🤷
wfh@lemm.ee 1 year ago
There’s also a community built Flatpak if you’re ok with that
helenslunch@feddit.nl 1 year ago
Welp. I see it now but when I looked it up through Gnome software, it showed me nothing. Guess I should know better by now.
rikudou@lemmings.world 1 year ago
I use the Flatpak version.
Thanks4Nothing@lemm.ee 1 year ago
What is an appimage?
Rolive@discuss.tchncs.de 1 year ago
Basically an executable package of an entire application for Linux. It doesn’t integrate with package managers meaning you’ll have to update it manually.
helenslunch@feddit.nl 1 year ago
I have no idea. It’s like a program that Linux doesn’t recognize as a program.
roofuskit@lemmy.world 1 year ago
There’s also Orca and SuperSlicer which are forks of the same code as Prusa.