I’ve just become a CAD hobo or squater you could say. There will always be one ““free”” piece of cad software that caters to the casual 3D printer and I’ve just accepted that they will inevitably raise the price and I’ll just have to jump ship again. But, at least I get to keep all the knowledge and that is what counts.
Comment on Fusion 360 increasing annual price by $190 USD
sj_zero 6 months ago
It's one of the biggest problems of the whole 3d printing ecosystem that so many people are relying on software like fusion or tinkercad that could shut down, lose its free option, and see massive price increases on subscription software.
I wish I could wrap my head around freecad, but we're just not there yet and we may never be. I feel like it or something like it must be our future because until we have a full libre software chain we're living on borrowed time.
Goodman@discuss.tchncs.de 6 months ago
MMNT@lemmy.world 6 months ago
Uhm, what about Blender?
SmoothLiquidation@lemmy.world 6 months ago
Blender is not designed as a CAD software. It is for 3d modeling. So you would use Blender to make graphics for a video game, or a 3d movie.
CAD is more for designing things to be made outside of a computer, so 3d printing, CNC or stuff like that.
Blender doesn’t consider the object as a whole, and can leave holes that a CAD setup would handle.
RagingRobot@lemmy.world 6 months ago
You can still use blender though if you know how to model in it already. Just don’t leave holes and you will be fine. I use that for a lot of 3d prints I make just because I am already comfortable with it.
Aux@lemmy.world 6 months ago
Blender workflow is very different to a CAD workflow. It’s ok for small things, but if you need to design some complex functional parts with tight tolerances, you will waste a lot of time in Blender.
Sorgan71@lemmy.world 6 months ago
blender can be used as cad software, but for any practical application, you want parametric design.
rustyriffs@lemmy.world 6 months ago
I wish I could wrap my head around freecad, but we’re just not there yet and we may never be.
May I ask why it is that you say this?
sj_zero 6 months ago
I've got an IQ of 87. So far, tinkercad is basically the best 3d modelling program for me so I can make stuff by using arrow keys to move around basic shapes.
rustyriffs@lemmy.world 6 months ago
XD
Well at least you’re honest
MMNT@lemmy.world 6 months ago
Rhino 8 is very easy to use now with a new option like in sketchup for push/pull. They have a perpetual license so no subscriptions.
VandalFan77@lemmy.world 6 months ago
I also have this question. What is so different about the workflow between FreeCAD and other 3D CAD software? If you can do one, you can do the others.
Crozekiel@lemmy.zip 6 months ago
The learning curve is steeper mostly due to tools not having as intuitive names and ui layout.
I dove into fusion 360 last year and was making functional and nice parts within the first couple of hours. Since moving to Linux I’ve tried freecad and while I can eventually find the tools that do the same things, it is less intuitive to get there.
Additionally, when I run into a roadblock in fusion 360, I can usually find quick and easy explanations or tutorials for it, and just have not had the same luck with freecad. I can usually get the hurdle crossed with the tutorials but I find I have to look up the same stuff often as it doesn’t stick.
This is all nebulous as all hell, I admit. And I can vaguely tell that it does all the same things similarly to fusion 360, but it’s just different and obscured enough that I feel useless and obtuse using it and spend more time searching for tutorials and answers than I do designing.
I want to learn it. I want to use it. But I still find myself in fusion 360 when I need to get a part designed sooner rather than later - it took less effort and faffing around to get fusion 360 working in proton ge than getting to a stable point using freecad.
Halvdan@sopuli.xyz 6 months ago
Well put. I have the exact same experience.
captain_aggravated@sh.itjust.works 6 months ago
FreeCAD is a strange mix of over-designed and unfinished.
There’s like three different workflows for doing parametric CAD, plus a drafting workflow for an AutoCAD architectural experience, plus workbenches for meshes, NURBS, etc. Occasionally a tool you need will be in another workbench. There is no official assembly workbench included. It’s not exactly obvious how workbenches work together. A lot of shortcuts which have become Just How You Do Things in other CAD software aren’t present, so you have to do things an awkward long way. Add-ons and macros can help…but are poorly documented if at all.
LifeInOregon@lemmy.world 6 months ago
I’ve started watching a freeCAD tutorial series on YouTube. It’s a little slow going, since I don’t have a huge amount of time to dedicate to it, but it’s amazing how quickly the basics can be picked up.
JustEnoughDucks@feddit.nl 6 months ago
There is going to be a TON of progress next year. I think 2024, freecad will be very usable for hobbyits.
Nilz@sopuli.xyz 6 months ago
2024, the year of
Linux desktopFreecadJustEnoughDucks@feddit.nl 6 months ago
Always 1 year away!
dual_sport_dork@lemmy.world 6 months ago
I’m a hobbyist, and I find FreeCAD very usable already. But then, my beard is long enough that I remember all of the art and design I did back in the day in all those old janky software packages running in DOS (sometimes even in as much as 640x480!) so maybe my tolerance for obtuse horseshit is higher than most.
rustyriffs@lemmy.world 6 months ago
Hey, give us one of those cool privacy respecting links if you don’t mind :)