I have a fan plugged into a smart switch that I’ve set to turn off when I fade up my mic while doing my radio show. It’s the most glorious use of throwing the internet at a home appliance I’ve yet come up with.
Comment on Google Assistant Is Basically on Life Support and Things Just Got Worse
fodor@lemmy.zip 3 days ago
You got to love the author of that article. If you want the lights to turn off and on normally, maybe people should use light switches. Those aren’t going to break due to software downgrades, those don’t require Gemini or internet connections.
And I understand, there are rare situations when throwing the internet at your home appliances can make sense for solving niche problems. Those situations definitely exist, but for almost everyone almost all of the time, but it’s pretty fucking easy to turn lights off and on.
DJDarren@sopuli.xyz 3 days ago
Taleya@aussie.zone 2 days ago
We have smart switches set to turn off floor sitting electricals if the leak sensor picks up a flood in the basement brewery. It also alerts us through HA there’s a beernami
sexual_tomato@lemmy.dbzer0.com 3 days ago
I have three lights that were wired to one switch. With smart bulbs, I can individually turn them on and off or dim them. No “dumb” solution exists for homes that were wired in a stupid way.
Taleya@aussie.zone 3 days ago
We have leak sensors in the basement brewery and sockets that help the hubs ADHD and anxiety (did i forget to turn X off? I shall check my phone), all running through a HA server. A mate has literally programmed in migraine protocols.
Automation ain’t bad. Capitalism is what the haters are angry at. Wish they’d go shit on that instead of stupid commentary about laziness.
Pyr_Pressure@lemmy.ca 3 days ago
You can get socket extensions where the bulb goes into it and then each extension is connected to a wall mount remote switch. No wifi needed and then you have a wall switch for each bulb.
Doesn’t fit into every light fixture though depends on the design.
sexual_tomato@lemmy.dbzer0.com 3 days ago
If Google assistant ends up dying this is the way I’ll be going with. I’ve already got HA up, I’m just using stuff that predates my HA setup.
Jakeroxs@sh.itjust.works 3 days ago
Automated lighting based on day of week and weather is fun tho, then again I run it through home assistant lol
Squizzy@lemmy.world 3 days ago
These just dont need to be online. 90% of the use I have seen is timers and lights, like a half step above hello world.
There is a market for voice assistants that are local.
cynar@lemmy.world 3 days ago
Home assistant is capable of it. Unfortunately it’s not yet overly user friendly about it, but it’s getting better rapidly.
Squizzy@lemmy.world 3 days ago
I did see something recently about local LLMs and voice input layers. The post made it seem very Jarvis like, think it may have been the voice used or the name.
Knowing nothing about tech other than I want my privacy I am hoping it is feasible for the common man
kayohtie@pawb.social 3 days ago
There’s a mode for voice control that is even friendly to a Raspi 4 or 5, but it’s very simplistic in control, basically a super lightweight speech to text trained only on device names and aliases. Think the speech to text in late 2000s through early 2010s non-smart phones.
Small models for faster-whisper will run on even my little Dell Micro i5-6500T that I have Home Assistant running on, it’s just a little bit slow, but it absolutely works and is usable speed! I run a larger model currently offloaded to my server, which has an RTX 2070 Super in it, but that’s to make it perform more like how Google used to a long time ago, and it’s unused power most of the time.
They’re trying to make it as accessible as possible for sure. There’s even options to use cloud STT and TTS (they even include it in the Home Assistant Cloud optional feature), but it’s definitely cool as hell to be able to talk to an open-source-design speaker and get a reply and control any switches or lights or even my thermostat and robo vacuum without needing the Internet to work. As long as my Wi-Fi and HA box are up, I’ve got options!
cynar@lemmy.world 3 days ago
It has several modes. The most basic is speech to text, pattern match, then implement. It also has text to speak for feedback. No actual AI in the loop.
It’s also capable of tying to AI models in various ways. It’s mainly intended for question answering. Either general, or about your data.
I personally don’t trust a non-deterministic AI having direct control of my house, so the split is useful.
Taleya@aussie.zone 2 days ago
Hell, win Vista used to support it. I built a very very stupid jarvis years ago on a bored weekend with win VR and some zigbees
interdimensionalmeme@lemmy.ml 3 days ago
I just leave everything on all the time.
shalafi@lemmy.world 3 days ago
I turn several lights on and off with a single command. The smart thermostat is the killer app for me though.
stealth_cookies@lemmy.ca 3 days ago
Lights are one of the areas where I think automation is genuinely useful, but my rule with anything “Smart” is that it has to be able to run 100% locally.
cynar@lemmy.world 3 days ago
It also needs to fail gracefully. A smart switch needs to fail to a dumb switch, not “no switch”.
rebelsimile@sh.itjust.works 3 days ago
and retire gracefully, where the device becomes open source and available to the community of owners who have invested in it.
IsoKiero@sopuli.xyz 3 days ago
You’re absolutely correct. I have few smart switches around the house and automations for yard lights and stuff like that are pretty nice to have but I still have the physical switch where the dumb switch was to interact with if the automations are down or I just want to override them. The ones I use even accept the same faceplate than traditional ones so there’s no change on anything unless you want to automate things.