Video transcoding web interface (self hosted)

Submitted ⁨⁨23⁩ ⁨hours⁩ ago⁩ by ⁨MajesticElevator@lemmy.zip⁩ to ⁨selfhosted@lemmy.world⁩

Hi! I’m looking for an open-source, preferably FOSS video transcoding web interface.

I would like the transcoding to be done on the server side, be secured by a password if possible (so people don’t 100% the server), and I want no data sharing. Most important feature: must allow web uploads. I don’t want to automate transcoding, or transcode files that are in the server: I want clients to be able to upload their media and get it transcoded.

The transcoding aspect is important: not just a change in container / file extension, but a real transcoding (changing video codec). Being able to change the bitrate is a plus.

I’ve been looking at many projects and most are sadly either too simple for my needs (only container change, no real ability to choose the codec, or unchangeable bitrate), or focused on files that are already on the server.

Thanks :)

source

Comments

Sort:hotnew top

HybridSarcasm@lemmy.world ⁨15⁩ ⁨hours⁩ ago
github.com/TheNickOfTime/handbrake-web

source
- MajesticElevator@lemmy.zip ⁨14⁩ ⁨hours⁩ ago
  
  must allow web uploads
  
  source
  - tripflag@lemmy.world ⁨5⁩ ⁨hours⁩ ago
    combine it with a service for uploading files to your server, there’s dozens of those
    
    source
  - HybridSarcasm@lemmy.world ⁨13⁩ ⁨hours⁩ ago
    Well, unless you feel like writing that feature into this project, perhaps you could modify your requirements slightly. Copying your local file to a share that’s also mounted to this handbrake-web instance would accomplish the same goal - taking local files and having them processed by this backend service.
    
    source
    -> View More Comments
scrubbles@poptalk.scrubbles.tech ⁨22⁩ ⁨hours⁩ ago
I’ll ask the question why do you want something hosted, if you don’t want the files to be on the server too, or at least accessible via a mount. There’s a couple projects who do that for a reason, you can’t just upload an 80gb video file through a web interface simply. For home use it makes more sense for it to be connected to some sort of nas and you point it to the file on the nas, and then point where on the nas you want the output file.

As written, I don’t think you’ll find a lot. I think what may serve you better is finding a server solution that watches a directory and then runs transcodes based on pre defined templates, and spits them back out in a known location.

source
- MajesticElevator@lemmy.zip ⁨22⁩ ⁨hours⁩ ago
  Because I want to be able to transcode files from my phone, or from any device without having to install anything.
  
  source
  - just_another_person@lemmy.world ⁨22⁩ ⁨hours⁩ ago
    It doesn’t quite work like that.
    
    Are you just looking to view these files on different devices? Run Jellyfin and get live transcoding when the files are accessed.
    
    If you’re sure you want a transcoding pipeline, check out Encore, or one of the handbrake webUI’s available.
    
    source
    -> View More Comments
  - scrubbles@poptalk.scrubbles.tech ⁨22⁩ ⁨hours⁩ ago
    The problem exists of how do you get files to the server. Again for a big video file you need a place to have the original accessible for the entire duration of the transcode, and you need a drop point to place the file when it’s done. And if you’re doing that, more than likely you have something like Plex or jellyfin, so why not just hook it up to your existing file locations?
    
    I run jobs all the time from my cluster, but the issue always comes back to persistent storage. Where are the files you need to act on, and where should the finished results be placed? You’re trying to skip those important steps here.
    
    source
    -> View More Comments
i_stole_ur_taco@lemmy.ca ⁨20⁩ ⁨hours⁩ ago
I feel sick saying it, but I think this is a project you could complete with AI. It sucks ass at understanding complex problems, but it’s good at cranking out small scripts to integrate tools together.

You basically just want a wrapper around ffmpeg with a light web interface to handle upload, script execution, and download.

LLMs are pretty good at spitting out a simple web interface that runs in a barebones server like Express or nginx.

If you don’t need to worry about security or accessibility or any “not on the critical path” concerns, this could probably work after a few iterations.

As for anything already out there - I’ve never come across anything. The closest app I can think of is TDARR which is intended to automatically transcode your media library to h265. That wraps up some of the ffmpeg stuff you want, but doesn’t address the upload/download half of the workflow.

source
- MajesticElevator@lemmy.zip ⁨14⁩ ⁨hours⁩ ago
  Yea, I’ve used it a fair bit before, and it’s pretty good at doing UI, the one thing that I dislike haha
  
  My process is pretty much pointing out and fixing the small mistakes the model does. A lot of people hate AI but it’s honestly a game changer.
  
  source
Mechanite@lemmy.world ⁨18⁩ ⁨hours⁩ ago
Might be able to work something together with TDARR and maybe Syncthing or something to handle the file transportation

source
catloaf@lemm.ee ⁨20⁩ ⁨hours⁩ ago
I’m not aware of any existing products, but this sounds like you could knock it out in a day writing it yourself.

source
- MajesticElevator@lemmy.zip ⁨20⁩ ⁨hours⁩ ago
  That’s what I usually do but I’m trying not to reinvent the wheel this time (and not spend too much time on it). No luck :-/
  
  source
Bakkoda@sh.itjust.works ⁨19⁩ ⁨hours⁩ ago
[deleted]
source
- MajesticElevator@lemmy.zip ⁨16⁩ ⁨hours⁩ ago
  Tdarr 👀 I saw you
  
  source
  - Bakkoda@sh.itjust.works ⁨12⁩ ⁨hours⁩ ago
    Lol yeah. I went back and realized i missed the entire part of the upload. To be honest it’s still the single best system I’ve ever used for the task. I would still recommend it but you’d have to jank together some other stuff.
    
    Metube to tdarr?
    
    source