How cool, more about cloudhoppers if you’re curious like me. It looks like they start around $23,000, which is a lot considering you can get into paragliding for a lot cheaper than that I think. I would rather paraglide.
Comment on Eat it
Rivalarrival@lemmy.today 4 months ago
Licensed balloon pilot here… The only manned balloon for which you don’t need a license (in the US) is an ultralight, weighing less than 155lbs empty.
My balloon weighs 515 lbs empty. It’s not very big, either.
Zetta@mander.xyz 4 months ago
Rivalarrival@lemmy.today 4 months ago
Those $23,000 balloons will be certificated aircraft, and will need a licensed pilot, even though they might otherwise qualify as ultralights.
Most ultralight cloudhoppers are homebuilt envelopes with commercial burners and fuel systems. Material cost in the neighborhood of $5000.
idiomaddict@feddit.de 4 months ago
I’m so afraid of heights that my palms are sweating reading that, but that’s an objectively cool hobby
Rivalarrival@lemmy.today 4 months ago
In regular balloons, the sides of the basket are about waist-high. You’re well contained. I get pretty nervous on a ladder or apartment balcony, but I’ve never felt any height-related anxiety in a balloon.
You don’t actually have to fly to enjoy the sport. Crewing is fun by itself. Commercial operators pay pretty well. Private pilots will usually buy you dinner after a flight.
aeharding@vger.social 4 months ago
Join us !paramotor@lemmy.world
player2@lemmynsfw.com 4 months ago
Meanwhile, the FAA is arbitrarily regulating 250 gram RC aircraft as if they’re a threat. The industry is simply innovating to increase performance of ultralight RC aircraft to avoid Remote ID requirements.
riskable@programming.dev 4 months ago
To be fair, a 250g RC aircraft can cause a lot of destruction to a plane that’s in the process of taking off/landing or to a car on a highway.
Having said that, they really have gone overboard with the regulation. Restrict airspace near airports and over highways, not something as ambiguous as “over people”. They also (still) require a spotter for FPV which is just silly. The point of the spotter is so you can figure out where it went if you lose control (presumably, to take responsibility if it crashes into something important and does some damage). Anyone flying FPV is going to know exactly where the RC aircraft was when they lost control (and modern ones will return themselves home if contact is lost like that).
They need to focus more on regulating features instead of “what and where”. If every RC aircraft has to have a return to home feature that would make more sense than something super ambiguous like, “don’t fly above people.”
player2@lemmynsfw.com 4 months ago
Agreed, I have no desire to fly near airports or over 400ft. I’m just in my FPV quad in my backyard, no other person in sight, and they arbitrarily worry about my 260g drone and not my 240g drone, it’s silly and unenforceable unless you really screw up.
Rivalarrival@lemmy.today 4 months ago
The “what and where” requirements are easy to enforce. If a drone goes out of control and strikes a person, it was clearly in violation of a rule against flying over people.
“Return home” is a good start, but it is not enough. The feature set also has to include “see and avoid”. If it can decide to “return home” directly into the side of a manned balloon, it is not safe enough for unrestricted autonomous operation.
I say this as a balloon pilot who has observed drone pilots operating in the vicinity, and even attempting to land on top of a manned balloon.
BorgDrone@lemmy.one 4 months ago
An RC aircraft is basically a guided missile with a meat grinder at the front. The electric ones are surprisingly more dangerous than the nitro ones. A nitro engine can stall if something gets in the prop. An electric motor just keeps going.
Go talk to some old geezers at your local RC club, they’ll undoubtedly have some nice tall stories about what happens when props get in contact with body parts.
Emerald@lemmy.world 4 months ago
Off-topic but man look at this cloudhopper community website
Aquila@sh.itjust.works 4 months ago
TIL I can walk around with a flamethrower as long as I have a balloon strapped to my back
FiniteBanjo@lemmy.today 4 months ago
Don’t forget you’re still not allowed in a lot of US Airspace even if you don’t require a license for it.
Rivalarrival@lemmy.today 4 months ago
True. The main airspace restrictions on ultralights that are not on certificated aircraft are a prohibition against flying over congested areas (yellow on a sectional chart), and within the lateral boundaries of Class E airspaces around airports. (You can’t fly an ultralight in the Class G airspace underneath the Class E)
aeharding@vger.social 4 months ago
Sure but the vast majority of US airspace is uncontrolled.
captain_aggravated@sh.itjust.works 4 months ago
Incorrect. The vast majority of the airspace over the contiguous United States is controlled, though there is a lot of it where participation in ATC is not necessary for VFR flight. From 1,200 feet AGL up to 18,000 feet MSL you’re in Class E, and from 18,000 to 60,000 you’re in Class A. Above that you’re in Class E again. In some places, usually over some un-towered airports, Class E will extend down to 700’ AGL or down to the surface as marked on sectional charts. Class D airspace, as well as the center columns of C and B airspace, extend to the surface.
Class G airspace pretty much only exists below 1,200’ AGL in most places, I think there are remote areas in the middle of the flyover states and Alaska where the Class E floor is higher because there’s nothing there, but that may be changing with ADS-B and shit.
It is not mandatory to participate in air traffic control to fly in Class E airspace. Laymen tend to use “controlled airspace” to mean “off limits without permission” but that’s not how that works; Restricted areas for example require clearance to enter but exist as a separate concept to the alphabet airspace system.
“Controlled airspace” means some part of the air traffic control system has coverage in that area and can provide traffic separation and sequencing for IFR flights. For VFR it’s a little more complicated; in Class A airspace (high altitude en-route airspace) VFR flight is not allowed. Terminal airspace (Class B, C and D, found around airports) participation in ATC is required for all flights. ATC services in Class E airspace is optional for VFR and is on a “workload permitting” basis.
aeharding@vger.social 4 months ago
Yep that makes sense. I am more thinking about VFR flight in the context of ultralights. So let me rephrase- in the context of ultralights (VFR) the vast majority of US airspace does not require talking to ATC or even having a radio onboard.
BirdyBoogleBop@lemmy.dbzer0.com 4 months ago
So. What do I do if I start floating over controlled airspace? I can’t make it go any other way.
Coreidan@lemmy.world 4 months ago
Descend and land. You’d have done that long before “starting to enter” restricted air space. Otherwise enjoy your fine and potentially losing your license once the FAA finds out.
It’s like not you can accidentally enter restricted air space. You know you’re going to be entering the airspace long before you get there so there is plenty of time to take action.
chiliedogg@lemmy.world 4 months ago
Actually, a lot of people don’t realize they’re in restricted airspece. There’s more small airports than people realize.
Rivalarrival@lemmy.today 4 months ago
Flight planning.
You presume a scenario where you make this realization while you are in the air. In practice, you made this realization hours earlier, and adjusted your flight plan to avoid that problem. You selected a launch site that avoids putting you in that situation.
If I do find myself encroaching on controlled airspace, I could declare an emergency, inform the controller where I am so they can vector traffic away from me, and do what I need to do to get down safely. At the very least, I would expect to do a lot of paperwork, and possibly have my license suspended.
With Class B and C airspace, the boundary is altitude dependent. The outer ring of Class C is 10 miles from the airport. I can fly between 5 and 10 miles of Akron Canton Airport, I just can’t climb above 2500’ MSL while in that area. I generally plan my flights to stay outside 10 miles, with the understanding that I can just stay below their airspace if I happen to get too close.
captain_aggravated@sh.itjust.works 4 months ago
Small point of grammar: Floating “over” controlled airspace means you are still outside of it. Airspace is 3 dimensional so in addition to having horizontal boundaries, it also has vertical boundaries. Class C airspace for example, which you find around semi-busy airports like Raleigh-Durham International, looks kind of like a quarter stacked on top of a penny, except the stack is 4000 feet tall and 10 miles in diameter. You remain outside of the Class C airspace if you fly directly below the outer “ring.” Or if you fly directly above it. I’ve done both, though I usually make a habit of calling up the approach controller and requesting flight following so that they can talk to me if they need to (“me” being a licensed pilot flying Skyhawks or smaller).
If you are going to fly an ultralight aircraft, you should seek out and receive training about the national airspace system, learn how to read a sectional chart, read things like Part 91, etc. I would advise carrying an aviation COM radio and monitoring local CTAF frequencies.
If flying something like a free balloon, you should know the prevailing conditions before takeoff. If the wind is blowing in the direction of a no no place, just don’t launch. Stay on the ground until conditions for safe and legal flight exist.