Comment on If it works, it works...
j4k3@lemmy.world 1 year ago
You must have been really close to the end for that to work. I’ve tried many hacks but few really work for me in-situ for more that a dozen layers.
Comment on If it works, it works...
j4k3@lemmy.world 1 year ago
You must have been really close to the end for that to work. I’ve tried many hacks but few really work for me in-situ for more that a dozen layers.
4lan@lemmy.world 1 year ago
There wasn’t much left and nothing that would collide with it. Seemed to work well enough
I usually use glue stick but just ran out
Imgonnatrythis@sh.itjust.works 1 year ago
Usually? Like for routine pla prints? I’ve found myself having to do this (man I love magigoo) but the masses say I really shouldn’t have to. Kinda validating if this is actually a thing.
IMALlama@lemmy.world 1 year ago
If you have corners lifting during big prints it’s nearly always due to a bad first layer or warping. An enclosure, even if it has an open lid since PLA doesn’t really like high enclosure temps, would probably do wonders. But if you have an i3 style printer, enclosures can be kind of a PITA. You could also try a draft shield. Basically tell your slicer to print a skirt that’s the same height as the print itself.
TwanHE@lemmy.world 1 year ago
Pla can also warp when not cooled enough. Although with a a decent textured Pei sheets you should never have pla adhesion issues honestly
CmdrShepard@lemmy.one 11 months ago
Have you tried hairspray? I definitely prefer it as it’s easy to put on and gives nice, even coverage.