Comment on Firearm Advice

• teslekova@sh.itjust.works ⁨2⁩ ⁨hours⁩ ago

  You’re both wrong, they’re for unscrewing really tight screws.

  source
• mrnobody@reddthat.com ⁨21⁩ ⁨hours⁩ ago

  Yes, it generates a larger cavity/hole than a JHP (jacketed hollow point) and the article continues comparing JHP to this new round.

  A traditional HP is just that, the center is open, and it almost immediately breaks open on impact so shrapnel sort of goes all over the target. This is safer for everyone involved but might take several shots to stop someone because of the little actual penetration. Especially of a heavy canvas coat is worn out can severely degrade performance.

  This round, is copper filled with a fluid from the sounds of it, but instead of the front opening up in impact, this his there target and spreads from the rear (the fluid moving forward causing cavitation part). This means the round had a chance to penetrate while also expanding and puting pressure on surrounding tissue which causes more damage. Still though, as it expands, it should greatly reduce velocity and not go through the entire target. A JHP might go on 2-5 inches or more based on design and caliber. Maybe this could go 6-10 inches. If it did exit, there’s likely too little force to do extreme damage to whatever else it hits.

  I’ve got some in my safe, but never shot this particular round to experience it myself. I’ve shot all sorts of standard ball, FMJ, JHP, and composite or lead-free rounds of numerous caliber and form factor.

  source

  • GalacticGrapefruit@lemmy.world ⁨10⁩ ⁨hours⁩ ago

    This was extremely informative, thank you very much for sharing your expertise.

    source
  • sad_detective_man@sopuli.xyz ⁨21⁩ ⁨hours⁩ ago

    Oh shit for real? I’m stupid and sent you the ones I’m not familiar with because I didn’t actually read it before sending. They also make them without fluid, just a solid bit of copper. Does the same thing but doesn’t expand

    I looked up “fluted penetrator” and just linked the first thing I saw, so thanks for the correction and actually reading the article that I was being too much of a tool to read.

    This is the bullet I should have used in the image and original comment.

    source

    • mrnobody@reddthat.com ⁨21⁩ ⁨hours⁩ ago

      All good man!! There’s a ton of different ammo aimed at different things, so no doubt too many overlap in names and specs, etc.

      Holy shit that guy chose “defensive” ammo of .357 magnum lmao! Is there a .357 that wouldn’t destroy the target? Haha that’s awesome. The 9mm for the 2nd test is far more common, but interesting they’re going for penetration while still expanding. You’d think they contradict each other.

      All I know is, I don’t want to be on the receiving end of any bullets!

      source

      • sad_detective_man@sopuli.xyz ⁨20⁩ ⁨hours⁩ ago

        Okay, so that’s the wierd part of them. The author says expansion but it’s not the bullet itself expanding on those. The idea is the bullet stays rigid but those fluted channels and flat nose push matter outward away from the bullet.

        Yeah though, bad wound to try and do any kind of first response on

        source

        • -> View More Comments
• ProdigalFrog@slrpnk.net ⁨7⁩ ⁨hours⁩ ago

  These aren’t really that effective compared to a hollow point. They create a big visual in ballistic gel, but in a more realistic medium they act more like an improved FMJ, but still over penetrate badly (which isn’t a good thing in most cases).

  They tend to be recommend as a bear round, where over-penetration is actually valuable and desired.

  The same manufacturer actually makes a deeper cut version that doesn’t over penetrate called the xtreme defender, which is generally still worse than a good hollow point in standard calibers, but can be a good option for weaker calibers like .380, where hollow point under-penetrate.

  however, for 9mm and above, you’re better off with a standard hollow point, which is more effective and far more affordable than the all-copper xtreme rounds.

  source

  • sad_detective_man@sopuli.xyz ⁨2⁩ ⁨hours⁩ ago

    Oh, good to know. But how do you assess value? I know we like hp for transferring force but my personal attraction to these was exit wounds.

    Also according to a article I linked later, they break bones?

    source

    • ProdigalFrog@slrpnk.net ⁨2⁩ ⁨hours⁩ ago

      When it comes to pistol calibers, raw kinetic energy isn’t really a factor, they’re just too weak to actually induce any sort of hydro-static shock that could cause a permanent rupturing of nearby tissues, you need much higher velocities or energy to do that that, which only rifle rounds or shotgun slugs can reliably induce.

      For pistols, the only mechanism of action they can rely on is the mechanical size of the bullet itself, as the bigger the bullet, the larger the hole, and thus the faster the blood loss. Hollow points are the best method to cause bigger holes.

      Ballistic gel is a somewhat deceptive testing media, as it can show a big permanent wound cavity beyond the size of the bullet itself, which isn’t actually how it would perform real tissue, which is able to stretch much more than ballistic gel. What really matters for pistol rounds are being able to expand as much as possible while also maintaining adequate penetration (12" in gel), so that you can reliably penetrate bone and muscle to reach critical organs from any angle. You also want to ensure that the specific hollow point chosen isn’t prone to being plugged by heavy clothing if you live in colder environments.

      LuckyGunner provides the best comparison of bullets that I’ve personally seen for every pistol caliber, allowing you to avoid bullets that don’t adequately penetrate, expand, or over-penetrate.

      All pistol defensive pistol calibers break bone when struck, the xtreme penetrators will simply penetrate further and through more bone than a hollow point. This makes it act similarly to a hardcast (ultra hard lead that doesn’t deform) flatnose bullet, which are also usually only recommended for bear protection.

      Over-penetration is an extremely negative trait in personal defense against humans, as it means that the bullet will pass through the target into anything behind them, including innocent who you do not intent to hurt. In self defense rounds you want the bullet to stop inside the first target to avoid endangering anything behind them.

      But how do you assess value?

      Xtreme Defenders are a good value for bear protection, but are extremely poor value for self-defense, as they are more expensive than a good hollow point while providing less effective wounding characteristics and increased danger to bystanders.

      source

      • sad_detective_man@sopuli.xyz ⁨1⁩ ⁨hour⁩ ago

        Wow that is really disappointing. Is that why that Paul Harrel guy was using food items? And is 357 too slow to cause tearing like that then? Hydrostatic. I was lead to believe this would work like that because of the speed of that round.

        I’ll look up lucky gunner, too. Thanks for breaking all this down for me. It’s looking like bullets have gotten a lot cheaper recently so I might as well get some hp.

        source
  • HikingVet@lemmy.ca ⁨5⁩ ⁨hours⁩ ago

    Cool wasn’t looking for recommendations. You should have replied in thread.

    source