Iâm right there with ya. Donât forget to make sure you set the interleaving correctly on your Winchester drive!
Comment on Who did this đđđ
Grabthar@lemmy.world â¨3⊠â¨weeks⊠agoThe one I remember best was having to use the DOS âparkâ command before you shut down the PC. I guess I am that old.
ChrysanthemumIndica@discuss.tchncs.de â¨3⊠â¨weeks⊠ago
RememberTheApollo_@lemmy.world â¨3⊠â¨weeks⊠ago
Yup. Thankfully that âfeatureâ went away real quick and it became automatic.
bjoern_tantau@swg-empire.de â¨3⊠â¨weeks⊠ago
Huh, never ever seen that. We always used the rule "yoi can shutdown the computer when you can see the C:".
What does park do? Put the HDD arm into a parked position? Never needed that for ours, but we also had a blazingly fast 486 with a massive 250 MB hdd.
Grabthar@lemmy.world â¨3⊠â¨weeks⊠ago
Yeah, old drives didnât autopark like the IDE drive in your spiffy 486. I had an XT growing up, and dad was militant about having us remember to park the drive when we were done with it. I think by the end of the 80s, all drives were IDE and were autoparking, so the command was deprecated.
bus_factor@lemmy.world â¨3⊠â¨weeks⊠ago
I never had to do that, because our computer didnât have a hard drive. We booted DOS right from the floppy.
humorlessrepost@lemmy.world â¨3⊠â¨weeks⊠ago
Damn, I had a Tandy 1000HX (very much not a 486) and never had to do that.
Grabthar@lemmy.world â¨3⊠â¨weeks⊠ago
Cool, Iâve wanted an OS ROM chip since the early nineties, and often wondered why nobody seemed to be doing it. Guess they were all along!
You technically didnât have to park the old MFM and RLL drives, but if you didnât, then you just had the drive heads resting on the platters after you shut them down. Then if you bumped or moved the PC at that time, it could scratch the disk like a record. If you never tried to move it, there probably wasnât much risk.
From the sound of it, the HDD in your Tandy probably would have been an MFM or RLL drive, and depending on the drive model, it either autoparked the drive heads or didnât. As a PC clone running MS-DOS, the command was probably supported, but maybe not needed. Or you may have just been the equivalent of one of those rebels who held down the power button every time they wanted to shut down the PC and always got away with it!