Going to reply to your comment since it seems relevant but mixing metals in water can also corrode it
It’s why you don’t mix and match metals in PC water cooling
Comment on if pure water is not conductive why would condensation be an issue for electronics?
Kolanaki@pawb.social 1 month ago
Condensation isn’t pure water.
x4740N@lemm.ee 1 month ago
great_7562@ani.social 1 month ago
Isn’t it water that basically turned to vapor and then back? That should get rid of most minerals.
insomniac_lemon@lemmy.cafe 1 month ago
This would require both the air and surface to be free of dust. Maybe in a lab that could be true, but probably not in the real world.
litchralee@sh.itjust.works 1 month ago
If water vapor was the only thing airborne, then this would be mostly plausible. But the reality in any typical environment is for small particles of dust, soot, microplastics, COCs, etc to be in the air, in addition to the usual suspects of oxygen, nitrogen, carbon dioxide, etc. Some of those will increase the conductance of water, when condensed upon a cool surface. Think of water vapor as a lint filter that floats around the room until it lands on something.
But even in a hermetically sealed environment with only the typical atmospheric mix of oxygen and nitrogen and other trace elemental gases, and then water vapor, there’s still a problem. Air has a conductivity – measures in Siemens, the inverted unit of Ohms which is resistance – of 3-8 x 10^15, meaning it will not conduct much at all. But compared to condensation upon a PCB in this sealed environment, DI water has a conductance of 5.5 x 10^6. That is 100,000,000x times more conductive, although it’s still a tiny amount.
The reality is that all circuits and electronics leak small currents here and there, even through the air or through their PCB substrates. But the sum total of these leakage and creepage currents will be negligible in all but high-voltage cifcuits. Though that’s only under the rated environmental conditions.
When air is fully saturated at 100% humidity, some of those currents become noticeable. And for high-voltage switchgear, it can become an issue very quickly. But iutright water on most circuit would be disastrous due to arcing or shorting, or both.
Corkyskog@sh.itjust.works 1 month ago
So could I clean my air by putting a humidifier on one side with a fan and a dehumidifier on the other?
litchralee@sh.itjust.works 1 month ago
Wireless water, coming right up: www.youtube.com/watch?v=j_QfX0SYCE8
In all seriousness, not all participate sticks to water vapor, if said particulate is non-polar – the lipid envelope of one SARS-CoV2 comes to mind. It would be more effective to clean the air using a furnace filter taped to a box fan, and it’s only up from there: electrostatic filters or actual air cleaners with a filter.
That said, some console humidifiers push air through essentially a large sponge, and that can already be effective at trapping larger particulate, although not effective for tiny virus-sized particles.
BradleyUffner@lemmy.world 1 month ago
Ok, but it’s condensing on something that isn’t perfectly clean.
Zwuzelmaus@feddit.org 1 month ago
But then things like Whiskey and Gin would not exist…