and make a nice vinaigrette with it
Comment on Opened an old scientific instrument to see if it works...
MehBlah@lemmy.world 4 weeks ago
Give it the vinegar and baking soda treatment.
DavidGarcia@feddit.nl 4 weeks ago
syaochan@feddit.it 4 weeks ago
I understand the vinegar, but why baking soda?
WaterWaiver@aussie.zone 4 weeks ago
I would recommend rinsing the vinegar away with water instead. It’s already completely dissolved, but the baking powder might not be if you add that undissolved. You don’t want to leave anything behind.
homesweethomeMrL@lemmy.world 4 weeks ago
Fizz
intensely_human@lemm.ee 4 weeks ago
Volcano!
roofuskit@lemmy.world 4 weeks ago
Abrasive maybe?
Blue_Morpho@lemmy.world 4 weeks ago
I greatly prefer citic acid. It comes in crystals so a small tub equals gallons of vinegar, it doesn’t smell bad, and you can control the strength by dissolving more crystals into water.
It’s incredibly fast compared to vinegar at cleaning battery alkaline.
clay_pidgin@sh.itjust.works 4 weeks ago
Citic or citRtic?
Blue_Morpho@lemmy.world 4 weeks ago
Citric. Fixed!
nilloc@discuss.tchncs.de 4 weeks ago
Coca Cola works really well if you don’t have citric acid on hand. I’ve cleaned car battery terminals with it a bunch of times (over decades). The only bummer is that it’s sticky, but you can drink the leftovers.
MehBlah@lemmy.world 4 weeks ago
To each his own. I’ve tried a few solutions. I use vinegar and apply it with some large cotton swabs. I usually wash them with the vinegar two or three times and let it sit for an hour. Then I use the baking soda dissolved into water and apply it several times. If possible to remove the contacts completely I will soak it in vinegar and then the baking soda solution. I buff the contacts if they are badly corroded. I can’t stress enough how much a little dielectric grease prevents further corrosion.
Blue_Morpho@lemmy.world 4 weeks ago
Yeah, I use baking soda and dielectric grease after acid too. I was only offering that citric acid is better than vinegar in every way.