Hello, I am an environmental engineer sharing my design for a ~300 gallon IBC tote rainwater collection system. What makes this different and beneficial for self-sufficiency is the low cost per gallon. This tote also provides a large enough storage tank to use a dedicated irrigation pump for reuse. You could make this as simple or as complex as you wanted to.

IBC totes are frequently used for storing and transporting food grade materials, so there is an aftermarket for cheap used totes, you just have to verify what they were used for. I got this 275 gallon tote off of marketplace for $100 USD. It was previously used to transport food dye.

Other Materials:

Leaf filter, from $10 to $70 - my preference is the Leaf Eater Advanced ($66)

Downspout diverter, my preference is Earth minded Flexifit diverter ($20)

PVC pipe and valves, figure $50

Total entry cost with tank: $150 - $210

Optional:

Lid adapter for two inlet ports $10

1 HP irrigation pump $140

Discharge splitter $10

Wi-Fi controller $30

Piggy-back Level float, alternative controller $50

Ozone injector to keep the water fresh and odor free: $400 (luxury) JED Engineering model 203