Dell optiplex - how to transfer windows pro license to new SSD?

Submitted ⁨⁨1⁩ ⁨year⁩ ago⁩ by ⁨rotmulaaginskyrim@programming.dev⁩ to ⁨selfhosted@lemmy.world⁩

I’m planning to replace the existing SSD within my Dell Optiplex pc. When I bought it, it came with an SSD that had a windows installation with pro license activated. Now, when I replace this with a new SSD, how do I transfer the license?

source

Comments

Sort:hotnew top

x3i@lemmy.x3i.tech ⁨1⁩ ⁨year⁩ ago
Not at all, Windows 10 and beyond identify you hardware composition, so as long as you don’t swap the mainboard, the license is automatically applied again upon intetnet connection (assuming you install the same windows version and do not enter another license key during installation). If you want to transfer your data though, get a cheap external USB HDD enclosure and use clonezilla to clone the drive.

source
- rotmulaaginskyrim@programming.dev ⁨1⁩ ⁨year⁩ ago
  thank you!
  
  source
mypasswordis1234@lemmy.world ⁨1⁩ ⁨year⁩ ago
The system should activate itself if you only replace the disk.

But… if you ever need a license ~~use one of the activation scripts from massgravel on githu…~~ I mean buy a new license on microsoft.com and enjoy your shiny, legally activated operaring system.

…or just install Linux, if your use case allows you to do so

source
- TheWilliamist@lemmy.world ⁨1⁩ ⁨year⁩ ago
  There are a ton of $29 license sites out there as well. Yes, it’s grey market, but it’s not like anyone has gotten support from MS anyway.
  
  source
- Stowaway@midwest.social ⁨11⁩ ⁨months⁩ ago
  This is the correct answer. Dell, and other oems, have stored their windows keys in firmware on motherboards for years now. You could literally install on a fresh drive and it should auto activate. Typically at most you have to go to click activate yourself.
  
  This is all assuming the machine came with a pro license and wasn’t upgraded of course. It should have a sticker on it.
  
  source
Nollij@sopuli.xyz ⁨1⁩ ⁨year⁩ ago
If you install fresh using a USB created by the Media Creation Tool, there is one detail you’ll need to know. The install/OOBE setup will still prompt you to enter a key and activate. Just tell it to skip for now/activate later. Once it finishes and goes online, it will activate automatically.

source
RegalPotoo@lemmy.world ⁨1⁩ ⁨year⁩ ago
So some fun facts:

If you buy enough licenses from Microsoft, instead of giving you a bunch of unique licence keys to keep track of, they will give you a license that you can install on a server, and a special “volume license key” that you use on every machine - then, instead of talking to Microsoft to activate themselves, they connect to your server which ensures that it is activating as many machines as you have licenses for

These volume license keys are public knowledge to the point that Microsoft publish them on their site because they are useful unless you have a server to validate the activations

The server protocol is not complex, has been reverse engineered, and there are open source server implementations that forget the whole “ensure you have the right number of licenses” part
source
MangoPenguin@lemmy.blahaj.zone ⁨1⁩ ⁨year⁩ ago
The license is tied to the motherboard and hardware, so you don’t need to do anything to transfer it. Just make sure you install the same version (ie; 10 Pro) if doing a fresh install.

source
Kit@lemmy.blahaj.zone ⁨1⁩ ⁨year⁩ ago
Just in case it doesn’t carry over, run this first to get your Windows Pro key: www.nirsoft.net/utils/product_cd_key_viewer.html

source
fuckwit_mcbumcrumble@lemmy.world ⁨1⁩ ⁨year⁩ ago
How new is the optiplex? If it shipped with windows 8.0 or newer then the key is embedded in the bios and there is no transferring of the key.

If it shipped with windows 7 then just activate it like normal over the phone and it should work.

source
Bratwurstboy@iusearchlinux.fyi ⁨1⁩ ⁨year⁩ ago
massgrave.dev

source
taaz@biglemmowski.win ⁨1⁩ ⁨year⁩ ago
My windows pro license deactivated when I did ssd swap about a week ago (but I did a full bit copy then expanded the file system).

That was the moment I said fuck it and did a hwid activation.

source
Strit@lemmy.linuxuserspace.show ⁨1⁩ ⁨year⁩ ago
As far as I know, Windows 10 licenses are on the motherboard/BIOS, so changing the harddrive should just work.

I have heard some talk about the license getting disabled if you switch some hardware in machines as it no longer can identify it as the same machine.

source
- rotmulaaginskyrim@programming.dev ⁨1⁩ ⁨year⁩ ago
  aha, thanks!
  
  source
Froyn@kbin.social ⁨1⁩ ⁨year⁩ ago
If you're replacing, why not clone the old drive to the new and expand to fill?

source
- rotmulaaginskyrim@programming.dev ⁨1⁩ ⁨year⁩ ago
  I don’t think I have the equipment necessary to clone. This PC has only one m.2 slot. I’m guessing I need to get a M.2 to USB enclosure to clone right?
  
  source
  - darelik@lemmy.world ⁨1⁩ ⁨year⁩ ago
    Image it, store image in another drive, swap m.2, restore image
    
    source
    -> View More Comments