Hi! I’ve never had a server, except for a raspberry that I use as a DNS (pi-hole), but I’ve been wanting it for a long time. The other day I found something that is kinda old, but very cheap, and I’ve been thinking about buying it since then.
It’s an IBM System x3500 M4. It has an E5-2620, 32 GB of DDR3, and 7 wonderful 900 GB SAS hard drives (don’t know if actual hard disk or solid state), which would fulfill all of my linux ISOs needs for at least the next year (probably a bit more), and a RAID controller ServeRAID M5110. All for 210 euros, which I think is very cheap.
From what I know, the E5 is power hungry for modern standards, and the SAS drives are not exactly friendly for replacement parts. How much would that (mostly the SAS part) be a problem?
Also, what can I expect concerning RAID? That is definitely the most concerning thing for me, as I’ve never worked with it.
Another huge part is, I do not care about accessing it from the outside, but I’d be sharing this system with my brother, in another city, so we would have to figure out a way of doing it. Normally I’d use port forwarding, but we’re both behind CG-NAT. Is there any way of not using a third party server as a proxy/VPN/whatever? If not, what service would you recommend for this purpose?
Another thing, my brother just happens to have a probably working, 16 GB ECC DDR3 stick laying around, except that it’s 1600MHz, and the CPU only supports up to 1333MHz. I’m pretty sure that if I’d put two sticks with different frequencies, the CPU would use the lower one, but is that the case even if the CPU does not support the frequency of one of the stick? (in short, would putting the other stick work?)
If you have any other pointers or anything, let me know. Thank you :)
cynar@lemmy.world 1 hour ago
The rule of thumb with servers is
The trick is to remember you don’t actually need much performance. A home server isn’t generally a powerful machine. What matters is that it is always there.
A raspberry pi would actually make a wonderful server. It’s power efficient, small and quiet, with enough grunt to do most jobs. Unfortunately, it falls down on reliability. Arm servers seem more prone to issues than x64 servers. Pis also seems particularly crash prone. Crashing every 3-6 months isn’t an issue for most pi usages. When it’s running your smart home, it’s a pain in the arse.
I eventually settled on a intel NUC system. It’s a proper computer (no HDD on usb etc), with a very low power draw. It also seems particularly stable. Mine has done several years at this point, without a crash.
Bigger servers are only needed when you have too much demand for a low powered option, or need specialist capabilities 24/7. Very few home labbers will need one, in practice.
It’s also worth noting that you can slave a powerful, but power hungry system, to a smaller, efficient one. Only power it on when a highly demanding task requires sorting.