The Saga Of Hacking A Bambu X1 Carbon

Comments

• ExcessShiv@lemmy.dbzer0.com ⁨1⁩ ⁨day⁩ ago

  Does bambu labs core customer demographic really give a shit about the openness of their printers though? It seems pretty obvious they’re not targeting the 3D printer enthusiast but rather makers that just want a tool that works without any fuss.

  source

  • AZX3RIC@lemmy.world ⁨23⁩ ⁨hours⁩ ago

    That is exactly why I bought an A1 Mini when it came out after tinkering with an Ender 3 clone for years.

    My only concern now, that I didn’t think about when I bought it, is what happens when they stop supporting it?

    source

    • Imgonnatrythis@sh.itjust.works ⁨22⁩ ⁨hours⁩ ago

      You will buy a new one sheep.

      -sincerely Bambu Labs

      source
    • SebaDC@discuss.tchncs.de ⁨22⁩ ⁨hours⁩ ago

      Kind of the same for me. My hobby became a business and I need to ensure that it will survive whatever enshitification they do.

      Currently have 1 printer X1 carbon, and I will get a competing product next year.

      source
• sylver_dragon@lemmy.world ⁨21⁩ ⁨hours⁩ ago

  a Bambu Labs compatible heat sink, an E3D V6 ring heater, and a heat break assembly are required
  a fan was sacrificed to mount a Big Tree Tech control board. Most everything ended up connecting to the new board without issue, except for the extruder.
  made a custom mount for the ubiquitous Orbiter extruder.
  The whole project was nicely tied up with a custom-made screen mount.

  So, other than the enclosure and print bed, what’s actually left of the original printer? It seems like the way to get a Bambu printer to run FOSS is to open the box from Bambu Labs, toss everything inside the box in the trash, drop a custom built printer in the box, and then proceed with your unboxing.

  source

  • papalonian@lemmy.world ⁨15⁩ ⁨hours⁩ ago

    So, other than the enclosure and print bed, what’s actually left of the original printer?

    The… Whole printer? The only thing they changed are the hot end and the control board. The entire construction of the printer, including all of the linear motion components that make these things so rock solid, haven’t been touched. Swapping those two components out isn’t anywhere close to a “custom built printer”. Besides firmware, it’s 90% stock, and it’s trivial for someone with the expertise to get a klipper profile built for something like this.

    source
• Lutra@lemmy.world ⁨22⁩ ⁨hours⁩ ago

  …or a tool that will tell you what you can’t print or materials you’re not allowed to use

  … and then tell you that you can’t make it print better on your own … or faster on your own… but sell you a subscription to do the same thing.

  source

  • KickMeElmo@sopuli.xyz ⁨21⁩ ⁨hours⁩ ago

    What does any of that have to do with Bambu?

    source

    • Natanox@discuss.tchncs.de ⁨10⁩ ⁨hours⁩ ago

      It’s the kind of enshittification Bambu is moving towards. I kind of expect them to do something like this in the near future, only allowing the “correct” filament and hiding the full potential of “your” machine behind subscriptions nust like car manufacturers.

      source

      • -> View More Comments
• Lutra@lemmy.world ⁨22⁩ ⁨hours⁩ ago

  and a tool you don’t have to throw away when the evil minions who made it tell you that you have to.

  source