I have a cheap bedslinger at the moment, it prints well enough and with decent speed, but it’s a little finicky whenever I need to start a new print and I sometimes have to stop and restart 2-3 times in the beginning to get the first layer good. I’m also having some issues with ASA warping (especially on overhangs) it’s enclosed and heated to ~45°C.
I was thinking of building a voron, but I don’t really have the time to have a printer project, so I wanted something that’s close to what Bambu labs deliver, but ideally with the accessibility of klipper+mainsail.
I thought of getting the Prusa core one, but seeing reviews of it has really put me off it.
The printing speed is slow AF…a 37min benchy on a coreXY in 2025, WTF!? My bedslinger does it in less than 30min. The ecosystem Prusa delivers seems half baked at best, with no LAN access to the full printer interface? I’m used to klipper+mainsail which is amazing and offers full local control of every aspect of the printer settings/config, print jobs/queue printing progress and actual live video feed (Prusa is 0.1fps!?). At a 1350€ price tag, plus another 100€ for camera and accelerometer, it just seems like I’m not getting much for my money.
Is there anything out there either already running klipper, or can be flashed with it, that’s close to Bambu labs?
cecilkorik@lemmy.ca 10 hours ago
Prusa is tuned for reliability and consistency. They occupy a weird and illogical niche, for people who don’t want to have to tinker with their machines AT ALL but want to have the ability to. I personally fit in this niche, and I love my Prusa, but they really don’t make a ton of sense for most people I think, and there are probably better choices if you don’t fall into this niche.
ExcessShiv@lemmy.dbzer0.com 10 hours ago
No I definitely like to have the option but not the need to tinker, so I fit in that category. But their printer performance and functionality is just so far below pretty much every competitor out there.
cecilkorik@lemmy.ca 10 hours ago
I don’t agree with your premise that the performance and functionality is so far below every competitor. That is not my experience. What are you basing your claim on?
They are well made machines with high quality components and are in most cases perfectly capable of going as fast as the plastic allows. And if they don’t, a few minor upgrades to the hardware will get them flying as they’re typically mostly going to be hotend-limited. Are you competing the actual realistic maximum acceptable performance of comparable machines that have been independently tested by an experienced reviewer, or are you comparing numbers someone copied from marketing? Because these are not the same thing and only one of them actually reflects reality.
As far as functionality, the only feature I see wanting in Prusa’s lineup is IDEX, which I prefer over toolswitchers for making large numbers of small parts. I keep hoping their next model will be a spiffy little IDEX model, but no luck so far.