Submitted 1 month ago by yeldarb12@r.nf to selfhosted@lemmy.world
I’m looking at getting a 10 gigabit network switch. I only have 3 devices that could use that speed right now but I do plan on upgrading things over time.
Any recommendations?
I’m partial to mikrotik gear, the CRS305 has 4 sfp+ ports for around $150.
Gonna disagree here. Microtik is a problematic company at best. They’re super lax on security, and they’ve had a lot of issues with their products in general. They also offer no real warranty, but I assume that’s because they aren’t a dedicated networking company (they make other things).
Just last year the flags were raised on dated firmware that left something like a million devices vulnerable, and their response was lacking.
Trendnet makes solid stuff. Good warranty, US based.
‘US Based’
Newegg is ‘US Based’ too…
I tried a 5port 10g trendnet switch some time ago, had weird speed issues and package losses. No good experience at all :(
Have run hundreds of these and never had an issue. Never even had to do an RMA out of the box.
If you’re seeing packet loss on switches, you may need to pay attention to what “port speed” and total “switch fabric” speeds are these days. You can have a 10 port 1Gb switch, but the total fabric only does 6Gb.
That’s a big number. What’s the use case?
I have 10gbit between by truenas server and my proxmox server. The use case is faster access to files from my proxmox server.
1gbit is actually quite slow when we talk disk speed.
I had exactly the same use case and I ended up with a 40G DAC fiber for that case. It ended up cheaper than converting the whole lan to 10G.
That said, it feels like used 10G equipment is easier to come by than 2.5G for now, and if you have 2G fiber uplink and only 1G past the router then it’s a waste.
Email does take some serious bandwidth
On a more serious note, people who have fast Internet should be running Tor relays. It would make the network much faster and secure.
Will you protect them from police raids and cover their legal costs for running a Tor node?
And it’s quite likely they only have 10G locally, with way less bandwidth going to the outside.
Obligatory files.catbox.moe/6bwk52.gif
Honestly there isn’t a lot of reason for 10G. Honestly 100M is probably fine for some people who are just browsing the web. The big think it latency as some of those old copper connections are very painful.
I would stick with 1G and be done with it
This is a community for people who have home servers. 100M is fine for a couple people just web browsing, but that’s not the topic of this discussion.
Yeah, 100M is a no-go for me since my ISP provides much more than 100M, and streaming full-res videos would bottleneck that pretty quick.
1G is probably fine for us, but we’ll probably go 2.5G minimum the next time I need to swap out switches, maybe 10G.
Depending on your forecasted capacity needs, Ubiquity does have some attractive options depending on your comfort with managed vs unmanaged switches is. I am making some assumptions based on homelab tendencies. I have been very happy with the UniFi ecosystem personally, though I know it’s not everyone’s cup of tea. The Dream Machine Pro has been very good for me both operationally and reliability wise, and there are expansion options for 10Gb Ethernet or SFP+ switches that cover most (pro/prosumer) price ranges.
They are definitely not the best bang for buck necessarily, and I have not tried any MikroTik alternatives to directly compare so take my opinions with a big grain of salt. I work in a purely Cisco environment and am used to working almost exclusively in CLI, but I found the UniFi GUI and environment easy enough to pick up with a little effort. UniFi firewall is too permissive by default if you are using something like the Dream Machine as the front end, but as a Boundary non-expert it was not too difficult to configure satisfactorily. Wireless APs are pretty great too.
Do the devices have dual 10g ports each? You can build a triangle out of them.
Lem453@lemmy.ca 1 month ago
The comments here saying to not bother with 10gbe is surprising considering it’s the selfhosted community, not a random home networking self help. Dismissing a reasonable request form someone who is building a homelab is not a good way to grow niche communities like this one on the fediverse.
10gbe has come down in price a lot recently but is still more expensive than 1gb of course.
Ideas for switches: servethehome.com/the-ultimate-cheap-10gbe-switch-…
czardestructo@lemmy.world 1 month ago
I bought all the gear to do 10gbe but ultimately went back to 1gig simply because the power consumption. The switch alone used 20w at idle and each NIC burned 8w and I couldn’t justify it.
Lem453@lemmy.ca 1 month ago
Very reasonable. FWIW, sfp uses way less power than rj45 for 10gbe if that’s an option.
yeldarb12@r.nf 1 month ago
This is what I was looking for! Thank you!