Comment

Comment on Tech hobbyist makes shoulder-mounted guided missile prototype with $96 in parts and a 3D printer — DIY MANPADS includes Wi-Fi guidance, ballistics calculations, optional camera for tracking

<- View Parent

sudoshakes@reddthat.com ⁨9⁩ ⁨hours⁩ ago

Image

I synthesize energetics. I can make a primary explosive that is stable enough for cap usage with a solo cup. I can synthesize secondaries like RDX above (one of the more complicated common ones) in short order with a basic chemistry set and the internet to order basic reagents. None are controlled substances.

It is trivially easy to make effective shapes charges and energetics at home.

Synthesis is federally legal in the US so long as you do not assemble into a device or transport. You can do both with an SOT as an FFL.

If I wanted to, I could make a shaped charge that was point imitated and base detonated for the above projectile and it would punch through about 1.5 feet of homogeneously rolled steel.

The limit to threat is not the access to explosives, as the chemistry and processes are published freely online as easy to replicate. The drone parts and control surface actuation is by far harder and I say this as someone who has a professional background in computer science and software engineering.

source

Sort:hotnew top

YellowParenti@lemmy.wtf ⁨4⁩ ⁨hours⁩ ago
RDX on youtube if you prefer visuals apparently i can get 2.5L of nitric acid @ 70% for $220. Seems pretty straight forward.

source
UnderpantsWeevil@lemmy.world ⁨8⁩ ⁨hours⁩ ago

It is trivially easy to make effective shapes charges and energetics at home.

Safely?

If I wanted to, I could

You’ve got enough information to try to execute the above formula. Okay. And you’ve still got all your fingers after attempting this… more than zero times?

The drone parts and control surface actuation is by far harder and I say this as someone who has a professional background in computer science and software engineering.

Absolutely. We invented gunpowder centuries before we invented airplanes.

That said… as an anecdote, I had a friend who had a janitorial position. Used a bunch of bleach to clean a particularly stubborn toilet and dumped a bunch of bleach into the bowl. His coworker came in behind him and proceeded to piss in said boil, creating a toxic miasma that forced them to exit the restroom quickly and heavily ventilate it before returning.

“I could cook up some blasting caps with the trash from a frat party” is a theoretically believable claim.

“Every time I clean up a frat party, I add a dozen shaped charges to my inventory” is not.

source
- sobchak@programming.dev ⁨6⁩ ⁨hours⁩ ago
  
  I had a friend who had a janitorial position. Cleaning a particularly stubborn toilet and dumped a bunch of bleach into the bowl. His coworker came in behind him and proceeded to piss in said boil, creating a toxic miasma that forced them to exit the restroom quickly and heavily ventilate it before returning.
  
  Lol, I’ve done that before in my apartment. Guessing it’s the same thing as an ammonia-bleach reaction.
  
  source
  - HeyThisIsntTheYMCA@lemmy.world ⁨6⁩ ⁨hours⁩ ago
    urea-bleach but close enough.
    
    source
- sudoshakes@reddthat.com ⁨5⁩ ⁨hours⁩ ago
  Safely? Yes.
  
  Keep the reaction stirring under ice and if you see the temp rice above 15 C you dump the whole thing in a water bucket or you get a runaway exothermic reaction that is never good with a high explosive forming crystals in the solution.
  
  If you are stupid, don’t ventilate, or are stupid stupid it will light your shed on fire and potentially kill you.
  
  That’s why you work at lab scale, and why you always keep your reactions under the temp limits with acids added slowly.
  
  Basic chemistry safety covers all the bases here.
  
  My preferred blasting caps are nickel guanidine based. I can play with the crystal morphology to produce small more friction inert powder and it is an extremely simple synthesis.
  
  You can use reloading press combined with highly suggested lexan sheet as a blast shield and wooden block to gently press the powder into caps. China sells packs of 1000 electrical ignition assemblies for $40 that you can then set off with a COTS or a clacker.
  
  I cannot emphasize enough that working at small scale and knowing what you are doing are important, but in faster time than it takes to print the parts for that drone you can absolutely complete the reaction, do some recrystalizstion, dry your product,and be ready to mix with plasticizer.
  
  source
FauxLiving@lemmy.world ⁨8⁩ ⁨hours⁩ ago

The drone parts and control surface actuation is by far harder and I say this as someone who has a professional background in computer science and software engineering.

www.youtube.com/watch?v=RrzxSOtj33s

The model rocket community has this one sorted.

source
- sudoshakes@reddthat.com ⁨5⁩ ⁨hours⁩ ago
  Oh the ones from BPS space are even more impressive with adjust on the fly tracking to 3D points and launched from a VLS he made himself.
  
  source