do you think it's worth to update an old CR-10s?

Submitted ⁨⁨10⁩ ⁨months⁩ ago⁩ by ⁨TheDuckPrince@lemm.ee⁩ to ⁨3dprinting@lemmy.world⁩

Hi! I have an old CR10-s, I don’t have money to buy a new, and more performant printer, so I just used and spare OrangePi PC that I had to use klipper, and I love it! It was so satisfying. Now I want to change the fan inside the awful control box but then? I read about stepper dumper are useful? I want to install a BLtouch, TL smoother and a ADXL345 for input shaping. but do you think it’s worth? I also tried to find info about new and more silent stepper driver, but for what I understood I can’t install them on my stock board, is that correct? I should move to a Bigtreetech?

All of this will cost me like maybe 60$ + maybe sth if I want to put a noctua on the extruder and a magnetic plate…

To sum up: does this planned updates worth? do I need to move to a new board for the stepper driver? it’s better to throw away the printer? (I’m joking). I want to achieve a more reliable print, lower noise and a little more speed.

(see the anycubic viper is so damn fast)

Thank you a lot in advance

source

Comments

Sort:hotnew top

TwanHE@lemmy.world ⁨10⁩ ⁨months⁩ ago
Don’t go for the TL smoothers but get new drivers instead. A btt Pico or skr mini would probably be enough for your needs. Instead of a magnetic pad + plate you could use g10 fr4 fiberglass which is cheaper but both work great.

For a probe see if there’s a quickdraw or klicky mod available since it’s cheaper and more reliable than a bltouch (clone).

But you should definitely have quite a capable printer with just a few small additions.

source
HeyLow@lemmy.blahaj.zone ⁨10⁩ ⁨months⁩ ago
I still rock my cr-10 v1 only changes I’ve made, added cr touch, added second z lead screw, added creality direct drive extruder, added a pi with octoprint, replaced all fans with noctuas including the control box, added dampeners on all steppers and replaced the original glass plate for a textured glass plate

Thing still prints like a dream, and more accurately than the 30k$ printer at my work lol

So I would say yeah upgrade it, it’s worth it

source
- thegreekgeek@midwest.social ⁨10⁩ ⁨months⁩ ago
  Yeah my CR-10v2 is still solid, and that’s basically a rebranded CR-10s. I’ve put in an original V6, added a bltouch and a pi for octoprint and that’s treated me pretty well so far.
  
  source
- Schmuppes@lemmy.world ⁨10⁩ ⁨months⁩ ago
  
  Only changes I’ve made
  
  Proceeds to list at least half of the essential parts of their 3D printer.
  
  source
  - HeyLow@lemmy.blahaj.zone ⁨10⁩ ⁨months⁩ ago
    I would consider them essential upgrades rather than essential parts, since they are competely optional and aren’t required to make the printer functional!
    
    There are endless amounts of upgrades for printers this is barely touching the surface!
    
    source
    -> View More Comments
EmilieEvans@lemmy.ml ⁨10⁩ ⁨months⁩ ago
Soon there will be the Artillery3D X4 plus for $450. I would say as long as the upgrade cost + resell value of the printer stays below $350-400 I would say it is worth it. Otherwise, sell the CR-10s and buy the new model with Klipper and linear rails.

For my own printer with Klipper, I bought a BTT Manta M8P and CB1. As you own an OrangePi and budget budget-focused check if you could buy a used Creality silent board for $20 or so.

Otherwise, the BTT skr mini e3 v2 is a good budget friendly option: biqu.equipment/…/bigtreetech-skr-mini-e3-v2-0-32-…

Once you have another $100 to spare on Hobbys look into an Orbiter V2 extruder and rapido UHF hotend. The Orbiter v3 might also be an interesting option.

source
surfrock66@lemmy.world ⁨10⁩ ⁨months⁩ ago
I am keeping an original craftbot plus alive and printing every day. It could use a replacement, but I know the quirks in and out. I just did all 4 stepper motors last month and it’s printing like new. I don’t like the model of the moving z plate and the clunky enclosure, and I could use more build area, but tinkering with the printer is part of the fun.

source