Submitted 10 months ago by SandbagTiara2816@lemmy.dbzer0.com to 3dprinting@lemmy.world
https://lemmy.dbzer0.com/pictrs/image/189cb31d-9d3a-43ff-9887-dd4e62937c00.jpeg
Good luck! Your imagination is the only limit!
P.S. Its kinda crazy how it changed my view of the world. If there is anything that is kinda troublesome, most of the time the first thing that comes to mind is: ‘Can I print something that would help?’ Then maybe I realize there are better options out there, or that right now dont have time for it. x)
I picked up an inexpensive “open box - brand new” Ender 3 just after Christmas. Figured it was cheap enough to give up if I didn’t like it, with enough open routes to tweak and improve if I stuck with it.
The display panel shows only a blue screen after assembly,though. Oddly enough, the only part not sealed perfectly (in its antistatic bag) was the panel. Waiting on a replacement to ship out as a result.
I’ve fixed blue screens by flashing the correct firmware. Have you given that a try?
^^this. Also if you open up the screen, maybe someone tried to flash it and left the SD card inside, that will cause this too. Ask me how I know 🤦♂️
That’s next on my list, if the replacement panel doesn’t fix the issue. Figured I’d go with the obvious solution first. Doesn’t help that I took a long look at the list of the firmware available for the Ender 3, and figured I’d cross that bridge another day. Creality does not make it simple to identify what’s what.
Welcome!
Hey OP, welcome to the best hoby ever 🎇
About LCD, Im not sure what model exactly you have, but there is something you can try. If you have 2 cables running from MBO to LCD, make sure you dont swap them. Also make a protective shield out of aluminium foil and cover the cable length. If it doesnt work I hope.you get replacement asap. Enjoy!
nice, I got myself an anycubic kobra 2 pro (got it cheap for only 290€)
roofuskit@lemmy.world 10 months ago
You’re going to need this: teachingtechyt.github.io/calibration.html
SandbagTiara2816@lemmy.dbzer0.com 10 months ago
Thanks!