theluckyone
@theluckyone@lemmy.world
- Comment on Edge-Lit, Thin LCD TVs Are Having Early Heat Death Issues 2 months ago:
That’s what she said.
- Comment on How exactly does one eat 1500 calories a day? 2 months ago:
Quote by the OP, emphasis mine: “Your body probably will go full panic mode and store back as much as possible as soon as you starts [sic] to eat normally again. I’d advice agains [sic] doing anything so violent, and just lower your food intake to a bit under normal.”
After which you attack the OP for violating the laws of physics. The OP didn’t attack CICO, promote bunk science, or deny climate. Neither am I.
You’ve got the personality of dog shit and an equivalent reading comprehension.
- Comment on How exactly does one eat 1500 calories a day? 2 months ago:
No, we’re not discussing CICO. We’re discussing your inability to recognize that the OP used the phrase “eating normally” to describe dieters returning to their normal eating habits (ie, how they ate prior to dieting), and your resulting attack on the OP.
- Comment on How exactly does one eat 1500 calories a day? 2 months ago:
Normal for them, not your normal. Nobody asked you for your personal definition of normal. Again, reading comprehension. Get some.
- Comment on How exactly does one eat 1500 calories a day? 2 months ago:
You really need to work on that reading comprehension. Valmond stated that people will regain weight when they return to eating normally after dieting.
You claim that’s not how physics work, then move the goal posts stating “if people only eat what they need, they won’t gain the weight back.” Well no shit Sherlock, but they’re not eating normally. They’re gaining the weight back if they go back to eating normally.
- Comment on How exactly does one eat 1500 calories a day? 2 months ago:
Most people don’t count calories. You said it yourself, a few posts below. Are you going to start redefining “normal” now to meet your argument?
- Comment on How exactly does one eat 1500 calories a day? 2 months ago:
Did you miss the “when you start eating normally again” bit?
You can rant all you want about the laws of physics, but you might want to practice your reading comprehension.
- Comment on Across America, clean energy plants are being banned faster than they're being built 8 months ago:
Upstate NY is just the cold weather version of the Bible Belt.
- Comment on New (Open Box) Ender 3 Blue Screen 9 months ago:
I’ll do that. Should I be using the “Ender-3 4.2.2 mainboard (32bit)” firmware? I’ve read that the Marlin firmware isn’t compatible with the GD CPUs, so I’m assuming the “Ender-3Marlin2.0.6HW4.2.2GD” won’t work.
- Comment on New (Open Box) Ender 3 Blue Screen 9 months ago:
I’ve got a laptop running Linux on it; connected it up at some point during my time with it. The laptop was able to see the USB to serial adapter, but I didn’t poke at it to see if anything was talking on the other side. I’ll try that today!
- Comment on New (Open Box) Ender 3 Blue Screen 9 months ago:
Checked for that, too. Both the original panel and the replacement only have one “port” for the cable on the back. The board has spots for two more to be connected, but both are missing. Looking at the front of the panel (as if I’m using it), the port is the left most of the three.
- Submitted 9 months ago to 3dprinting@lemmy.world | 10 comments
- Comment on Got an Ender V3 SE for Christmas- and successfully made my first print! Excited to dive into this hobby 10 months ago:
Just the basic Ender 3, I believe. No version number, so implied v1. Not a Pro, SE, or other appendment to the model.
- Comment on Got an Ender V3 SE for Christmas- and successfully made my first print! Excited to dive into this hobby 10 months ago:
That’s next on my list, if the replacement panel doesn’t fix the issue. Figured I’d go with the obvious solution first. Doesn’t help that I took a long look at the list of the firmware available for the Ender 3, and figured I’d cross that bridge another day. Creality does not make it simple to identify what’s what.
- Comment on Got an Ender V3 SE for Christmas- and successfully made my first print! Excited to dive into this hobby 10 months ago:
I picked up an inexpensive “open box - brand new” Ender 3 just after Christmas. Figured it was cheap enough to give up if I didn’t like it, with enough open routes to tweak and improve if I stuck with it.
The display panel shows only a blue screen after assembly,though. Oddly enough, the only part not sealed perfectly (in its antistatic bag) was the panel. Waiting on a replacement to ship out as a result.
- Comment on Moscow Bans QR Codes in Billboards Over Navalny’s Anti-Putin Campaign 11 months ago:
Your projection is showing.
- Comment on What happens of you use the gas from the exhaust pipe to inflate a tire? 11 months ago:
Tell me you don’t understand the concept of static electricity without telling me you don’t understand the concept of static electricity.
- Comment on HP exec says quiet part out loud when it comes to locking in print customers 11 months ago:
Do you see apartheid and genocide as political issues?
- Comment on It's that time of year when Scotty's brain melts. 11 months ago:
I’d prefer venting it into the manager’s office.
- Comment on Gen Z falls for online scams more than their boomer grandparents do 1 year ago:
My parents got me a subscription to Family Computing. Spent way too many hours typing in the lines of BASIC code contained in each one, debugging my mistakes, and playing them. There’s a joke in there somewhere…
- Comment on Gen Z falls for online scams more than their boomer grandparents do 1 year ago:
Xennial here: Come back and talk to me after spending a good chunk of your childhood editing config.sys and autoexec.bat, loading drivers and freeing up conventional memory.
- Comment on This post contains a minor exploration spoiler, but no story spoilers 1 year ago:
Depends on the location. There some places that look that desolate right now.