Those who are self hosting at home, what case are you using? (Looking for recommendations)

Submitted ⁨⁨10⁩ ⁨months⁩ ago⁩ by ⁨Gormadt@lemmy.blahaj.zone⁩ to ⁨selfhosted@lemmy.world⁩

TLDR: If you were building a NAS for 8 HDDs and 1 SSD today, what case would you use?

I’m going to be rebuilding my system soon (currently using an old PowerEdge T610) using one of my other older (R5 1600) systems and I’ve basically hit a road block on picking a case.

I’ve got 8 HDDs that need to fit in the system after it’s rebuilt (plus at least one SSD) so I’m kinda limited in that regard.

The rest of the system is planned out (mostly because I’m reusing old parts) it’s just the case I’m stuck on.

I’m wanting to avoid rack mounting currently mostly due to space (and wanting to keep it under $200)

I was thinking maybe the Fractal Design Define R5, the Fractal Design Node 804, or the Phanteks Enthoo Pro 2 but I’m open to suggestions.

source

Comments

Sort:hotnew top

NarrativeBear@lemmy.world ⁨10⁩ ⁨months⁩ ago
Fractal Design Define 7 XL

You can fit 18 HDDs into it plus 5 SSDs at the same time without custom mount points.

Though you do need to buy the extra brackets and trays.

Not my build exactly but a example.

…unraid.net/…/97612-fractal-design-define-7-build…

source
- Gormadt@lemmy.blahaj.zone ⁨10⁩ ⁨months⁩ ago
  
  18 HDDs into it plus 5 SSDs
  
  Sweating intensifies
  
  That’s a lot of drives, I’ll have to look into that one for sure
  
  source
  - NarrativeBear@lemmy.world ⁨10⁩ ⁨months⁩ ago
    I run TrueNAS myself in this case. I have two v-devs of 8 drives each in raid 2.
    
    Both v-devs have a extra spare each. 4 SSDs are used for quick read and write and the 5th SSD for os boot.
    
    source
    -> View More Comments
charles@lemmy.ca ⁨10⁩ ⁨months⁩ ago
Highly recommend cases by Fractal.

For self hosting I’d recommend either one of the Meshify 2 or Define 7, depending on local price and your specific needs. I personally went with the Meshify 2 XL and was blown away by the quality of the case. It’s built well and allows for a variety of configurations. It also makes maintenance very easy as the filters and side panels can all be removed without any tool to handle dust build up.

source
- NicestDicerest@lemmy.world ⁨10⁩ ⁨months⁩ ago
  +1 for Fractal Define - Absolute Beast
  
  source
LunchEnjoyer@lemmy.world ⁨10⁩ ⁨months⁩ ago
Fractal seems far superior at least in the budget range. Personally just bought a R5 second-hand for roughly 40euros. Totally worth it imo 😁

source
blazeknave@lemmy.world ⁨10⁩ ⁨months⁩ ago
804

source
hperrin@lemmy.world ⁨10⁩ ⁨months⁩ ago
I’m using a Fractal Meshify 2. It’s big, but I highly recommend it. It can hold 11 HDDs. I’ve only got 6 in mine, and it’s quite roomy.

source
Sup3rlativ3@lemmy.world ⁨10⁩ ⁨months⁩ ago
So I recently went through all of this headache. I started really wanting hotswap that didn’t look like it was from the 90’s. I also needed like 8 drives capacity which rules a lot of the popular cases out.

I thought about it for a while and I don’t really touch the drives at all on any of my previous Nas builds so that meant I didn’t need hotswap.

Eventually I decided that rather than try to hide the case away I would make it a feature of my living room and I went with the tower 500 and I really love it and everyone that has gone over has mentioned how cool it looks

source
- phrogpilot73@lemmy.world ⁨10⁩ ⁨months⁩ ago
  That looks an awful lot like what I have. I’m using the Lian Li PC-D600. I think I’ve managed to get my hands on one of the last ones in the wild. They aren’t even available used on eBay anymore.
  
  What I like most about it (and the Tower 500 that you linked) is that the motherboard is on one side, and the drives are on the other. Keeping the drives cool is easy, I just upgraded the fans on my SATA backplanes and the case, and even under load the drives run very cool.
  
  You can have this case when you pry it from my cold dead fingers.
  
  source
Codilingus@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
I know you said you’re against rack mounting, but JUST in case:

I love the look and tidiness of a nice rack mount system. So I got a Chenbro 4U case. It’s perfect for reusing my old components, and it has a standard size area on the front to install a hot swap HDD cage.

source
sxt@lemmy.world ⁨10⁩ ⁨months⁩ ago
I went with this www.silverstonetek.com/en/product/info/…/cs382/. It’s pretty decent but you are putting a hard cap on expansion. Also the fans it comes with are pretty loud so I’d replace them.

source
dan@upvote.au ⁨10⁩ ⁨months⁩ ago
I really like the Node 804 even though the design is quite old - probably close to ten years old now. Fractal Design are still manufacturing it, which is rare for case designs that old.

I recently built a NAS using an 804. I’ve only got three drives in it (2 x 20TB Seagate Exos X20 for data and 1 x 14TB WD Purple Pro for security cameras) but I wanted the ability to expand in the future, and I wanted to use a Micro ATX motherboard rather than a smaller one.

A Noctua NH-D15 fits fine, even though the spec sheet says it won’t fit.

source
terminhell@lemmy.dbzer0.com ⁨10⁩ ⁨months⁩ ago
I’m using an old HP z420 box. It supports up to 128gigs of ecc ram (which I have), has tons of drive and SATA options.

It could be possible to repurpose the chassis for custom builds too.

source
patchexempt@lemmy.zip ⁨10⁩ ⁨months⁩ ago
I got out of the “surplus hardware” a while ago; way too expensive and noisy to run, so super recommend ditching the poweredge. for home use, I ended up just going with a USB3 JBOD for storage, and a Intel NUC (which I think they don’t make anymore). it runs a ton of virtualized servers under kvm, a virtualized NAS, all without issue because it honestly spends most of its time nearly idle. point is: it’s definitely nice to have it all in one case and with high speed storage but maybe having to find something that can house a ton of drives isn’t a strict need if you aren’t actually going to put a ton of load on it.

source
Lem453@lemmy.ca ⁨10⁩ ⁨months⁩ ago
Used to have a node 304. Very happy I got a hot swap Roswell 4u case

source
- JustEnoughDucks@feddit.nl ⁨10⁩ ⁨months⁩ ago
  Have a node 304. Extremely happy with it. Literally unbeatable hard drive and CPU cooler compatibility for its size.
  
  That being said, it only fits 6 drives.
  
  source
rambos@lemmy.world ⁨10⁩ ⁨months⁩ ago
For 9 disks I would need to print bigger case, ut this one suits me well for now 😉

source
000@fuck.markets ⁨10⁩ ⁨months⁩ ago
I’m currently using one of the Rosewill rackmount chassis (www.rosewill.com/…/9SIA072GJ92847), fits well in my half rack along with my Unifi gear and HP ProLiant. I probably would’ve gone with something else if I had to buy it though- this was sorta a hand-me-down from a former roommate who didn’t want to take it with him when he left.

source
spyd4r@lemmy.world ⁨10⁩ ⁨months⁩ ago
Fractal Design Define 7

source
jandefris@lemmy.world ⁨10⁩ ⁨months⁩ ago
Using a U-NAS NSC-810A. Not the cheapest, but I love having hot pluggable disks with my TrueNAS build.

www.u-nas.com/xcart/cart.php?target=product&p…

source
retrieval4558@mander.xyz ⁨10⁩ ⁨months⁩ ago
I use a fractal design node 304. It’s pretty cool, but has all the limitations and problems you would expect from a case that size.

source
Cyber@feddit.uk ⁨10⁩ ⁨months⁩ ago
I have both Fractal Design and SilverStone cases… love them… but the internal layout is not 100% of the consideration

Have a think about airflow and cabling… some of them have weird air flow designs and if you’re putting the machine inside something, or next to something, then that can make more impact on day-to-day use.

For example, I have a Node 304 (not enough drive space for you) because it fits nicely inside Ikea shelving. But the front air flow under the front bezel did mean I keep that machine near the front of the shelf, not pushed back.

And also consider hotswap drive bay caddies that fit smaller drives into large drive bays. Sometimes these have weird power connections, but if you don’t have them do you have enough PSU leads? So, are they absolutely essential? Possibly. Possibly not…

Maybe not the answer you were lookong for, but those are my main considerations now…

source
SeriousBug@infosec.pub ⁨10⁩ ⁨months⁩ ago
I can vouch for the node 804, although I haven’t used the others so I can’t say which is the best.

source
Gooey0210@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
Lenovo thinkcentre m710q 🫡

source
colin@lemmynsfw.com ⁨10⁩ ⁨months⁩ ago
Just because it’s a bit different to what you asked, and no one else has said it, I’ve found great results with the Terramaster D5-300 and D4-300. Make sure you get the USB 3.1 type Cs, but I’ve been fine with the plain rather than ones loaded with RAID.

For every USB 3.1 socket on the back I get 5 drives, I can increase capacity incrementally, and for spinning rust they are faster than they could transfer anyway.

I’ve replaced my machine with a Dell USFF box now and it all works great.

Completely understand if it’s not your thing but you can add a drive box to your existing system without replacing anything.

source
Decronym@lemmy.decronym.xyz ⁨10⁩ ⁨months⁩ ago
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

Fewer Letters More Letters

RAID Redundant Array of Independent Disks for mass storage

SATA Serial AT Attachment interface for mass storage

SSD Solid State Drive mass storage

[Thread #375 for this sub, first seen 26th Dec 2023, 23:45] [FAQ] [Full list] [Contact] [Source code]

source

Fewer Letters	More Letters
RAID	Redundant Array of Independent Disks for mass storage
SATA	Serial AT Attachment interface for mass storage
SSD	Solid State Drive mass storage