Submitted 11 months ago by A7thStone@lemmy.world to 3dprinting@lemmy.world
https://lemmy.world/pictrs/image/23a8f9c8-2654-4efa-a851-bc05681745e9.jpeg
This is the second time this has happened. It looks like it added part of the model on to the side. Is it my slicer? I’m using a Creality Halot Mage, and Chitubox 1.9.5 because that is the only slicer I’ve gotten to work on Fedora that supports my printer that I’ve found. I’m completely new to all things 3d printing. This is my first printer and that is my sixth print in the picture.
I bet you printed this huge thing flat in the build plate?
Not the OP, but what do you mean by this? I feel there’s an implication that it should be laid out a different way?
With resin printers you don’t want to print flat on the build plate, you want them angled. I’m not the best person to explain this since I’ve only worked with FDM printers but nobody else seems to want to answer lol.
Contrary to fdm printing, resin printing doesn’t like large xy cross-sections because that means huge forces between the part and the fep.
This suction and pulling can lead to delamination of layers.
You typically want to angle parts and spam a bunch of supports. Which really is usually the opposite of what you wanna do on an fdm printer.
You would think that
So… did you?
Contrary to fdm printing, resin printing doesn’t like large xy cross-sections because that means huge forces between the part and the fep.
This suction and pulling can lead to delamination of layers.
what the heck IS happening here? The scratches, the extra chunk…it’s possessed
Pretty sure that’s resin though.
Also, their issue is likely printing large flat piece flat in the build plate.
Counterintuitive between resin and fdm, but resin didn’t like large flat cross-sections.
Ohhh yeah I think you’re right. That’s why I thought the layer height wasn’t so bad lol. I’m looking at this on my phone and I swore I could see small layer lines.
New Lemmy Post: What is happening to my prints? (https://lemmy.world/post/9492575)
Tagging: #3dprinting
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
Warl0k3@lemmy.world 11 months ago
Did you recently replace the screen?
A7thStone@lemmy.world 11 months ago
The FEP is brand new. I’ll try the peel height.