Proxmox HDMI output for one VM-container

Submitted ⁨⁨1⁩ ⁨year⁩ ago⁩ by ⁨Kir@feddit.it⁩ to ⁨selfhosted@lemmy.world⁩

Hi everyone, I’m planning to experiment with my first home server (jellyfin,nextcloud,bitwarden etc) running on a “old” Thinkcentre i5-7th. I’m thinking using proxmox in order to experiment with different configuration and I was wondering if it’s possible to have a single container/vr (with Libreelec) output HDMI to my TV, and keep other VM’s headless and controlled from another PC when needed.

Are there some particular setting or nwebie suggestion that could help me achieve that? Also, do you think proxmox is a good choice, or it’s better stick to a single debian/ubuntu server OS?

source

Comments

Sort:hotnew top

snekerpimp@lemmy.world ⁨1⁩ ⁨year⁩ ago
What you are looking for is gpu pass through. You can do it with integrated graphics as well as dedicated. There is a lot of good documentation out there for proxmox to do this.

I would totally start with a hypervisor. The ability to spin up a new VM for an experiment or project far outweighs any downside. I use proxmox, but that’s mainly because it was the thing to do when I was starting out. There are a few options out there, including installing Debian and running kvm/qemu, which is basically what proxmox is. They all have the same functionality, just different UI/features. Lxc containers in proxmox help a lot as well, when you have a small service you want to run but don’t want to take up a VMs worth or resources. These also helped a lot.

Good luck

source
- dragnet@kbin.social ⁨1⁩ ⁨year⁩ ago
  Just gonna add a bit here. I haven't used proxmox, but I do have a GPU I assign to QEMU/KVM virtual machines. The arch wiki has an article that helps a lot, for anyone who wishes to try this. I have also found that the virgl drivers allow for sufficient graphical performance for video decoding at high resolution, so that is another potential option to explore here that doesn't involve allocating the GPU to a VM.
  
  source
- stown@sedd.it ⁨1⁩ ⁨year⁩ ago
  It’s important to note that you will need 2 GPUs ( 2 PCIE or 1 integrated and 1 PCIE). One GPU is needed for Proxmox and the other can be passed through to the VM.
  
  source
  - Sethayy@sh.itjust.works ⁨1⁩ ⁨year⁩ ago
    Surprisingly this isnt actually needed. It makes it easier to setup, but isnt required beyond that (and some bios need one plugged in to boot but that won’t be an issue).
    
    My current setup is 2 nvidias both passed through to separate VMS, then I just use another PC to access the web console. My ideal setup would be a VM that launches itself when none else are running, to allow a graphical output even with the host headless
    
    source
Rand0mA@lemmy.world ⁨1⁩ ⁨year⁩ ago
I do this with proxmox on a Lenovo tinypc. However I’m using a Nvidia gpu for passthrough. Was awhile ago I set it all up. I remember it being fairly complex. Here is a super basic instruction for it. Possibly incomplete.

Check you have iommu enabled in efi/bios. (For Intel - enable vt-d)

Install drivers if necessary (again nvidia)

Blacklist device on proxmox host

Setup GPU passthrough (vfio) - assign the card video and audio to the guest vm.

Start vm and test

If you are using onboard card, you can probably blacklist it and use it for your vm… I’m not entirely sure how proxmox deals with losing its primary display… I expect it’ll cope ok. SSH for everything. Probably need to use virtio drivers. Install within guest…

source
- Sethayy@sh.itjust.works ⁨1⁩ ⁨year⁩ ago
  Random question, but proxmox has a display usually? what’s it even look like lol, the website has everything you could ever need
  
  source
mindfive@lemmy.world ⁨1⁩ ⁨year⁩ ago
Last time I had a vm with physical output was years ago, and it was an involved process. The thing you are looking for is PCI pass-through. Unless you are thinking closer to just running something like virtual box full screen?

Did you need your server to have hdmi output instead of running a normal jellyfin client? Would you consider a desktop os running server containers in docker or podman?

source
Faceman2K23@discuss.tchncs.de ⁨1⁩ ⁨year⁩ ago
Yes and quite simple if your equipment supports it, the other VMS will not have access to the GPU if you do that.

source
WeirdGoesPro@lemmy.world ⁨1⁩ ⁨year⁩ ago
What are you trying to display on the TV? I feel like most media can be handled better with something like PLEX rather than directly displaying it with an HDMI cord. Much easier to browse with a remote anyway.

source
- tburkhol@lemmy.world ⁨1⁩ ⁨year⁩ ago
  If you want to see anything on a ‘dumb’ TV, at some point there’s going to be an HDMI cord involved. Sounds like OP wants his old computer to be both a home server and an HTPC. Personally, I’d just run qemu or docker on the HTPC, but there’s no reason he can’t run both plex and libreelec/kodi as vms or containers on the same machine.
  
  source
candyman337@lemmy.world ⁨1⁩ ⁨year⁩ ago
Never tried anything line that before but I feel like you’d be better off setting up VNC for it and connecting something lightweight to your TV and just interacting with the VM via VNC

source