It really is t bad in the naked eye. I just slammed a reflection right on it. Or maybe was 0.01mm too high but I’ve seen way worse.
Comment on You can set text as a layer modifier in Orca
ExcessShiv@lemmy.dbzer0.com 3 weeks ago
Fun idea and it can male.a nice.touch of detail to an otherwise dull area…but holy crap that’s a bad first layer.
LazaroFilm@lemmy.world 3 weeks ago
ExcessShiv@lemmy.dbzer0.com 3 weeks ago
People accep different qualities I guess, if you’re satisfied and it works then there’s no reason to change things.
LazaroFilm@lemmy.world 3 weeks ago
Please indulge me.
ExcessShiv@lemmy.dbzer0.com 3 weeks ago
Just start from the top of Ellis guide, that should help you fix this and get a significantly better print quality.
fufu@feddit.org 3 weeks ago
Just jumping in here, the first layer does look kinda shitty, at least theres a lot of room for improvement.
Here’s a little guide to improve on a multitude of things by teaching tech.
Cool cura feature thou :)
Joelk111@lemmy.world 3 weeks ago
It isn’t that bad. Just needs a bit of z-offset adjustment.
ExcessShiv@lemmy.dbzer0.com 3 weeks ago
Z offset like you mentioned is probably wrong, extrusion multiplier is probably wrong, extruder might be incorrectly calibrated, PA is definitely wrong. It really looks like it hasn’t received any tubing at all and this was just done with OTB defaults.
B0rax@feddit.org 3 weeks ago
PA is also way too low (if it is even set at all). It could reduce the „thickening“ of the lines at each end dramatically.