Comment on Advanced sodium-ion battery prototypes now approaching 200 Wh/kg
JustEnoughDucks@slrpnk.net 6 days ago
That is amazing! I have just started making sodium ion battery chargers in my free time.
The bad thing abouslt sodium ion is that traditional CC/CV charging is harsh on the cells. Optimally each cell had to be CV charged at around 97.5% of its voltage end and then slowly brought up to 100%. Apparently that is how you get the most life cycles per cell
Why bother with the last 2.5% at all?
JustEnoughDucks@slrpnk.net 5 days ago
Good question!
Sodium ion already had a reduced capacity (30% less at least than Lithium ion). And 2.5% of voltage is not 2.5% of capacity, something more like 3-4% (still small)
You could then just choose to use a configurable lithium ion IC, but almost all of those have an undervoltage lock out (safety shutoff) that is 2-2.5V that you would have to stay above. Sodium ion drops out at 1.5V, so I would again be losing a chunk of capacity. If I lost 30%-35% of capacity on an already reduced capacity cell compared to lithium ion, then battery life would be quite disappointing.
Do that rules out using a standard Lithium-ion charger.
If I am building a custom charger anyway (most non- embedded systems have custom chargers), then might as well put in all the features now and get 100% of the capacity. Cells usually also have a higher lifespan (double or more) by dropping that high CV charge voltage 0.1V or so and settling for lower capacity, but Sodium Ion lifespan is already 3000-5000 cycles compares to lithium’s 500-1000 (lithium ion and li-po, lithium iron phosphate is in the higher range) so might as well then use the full capacity.
SaveTheTuaHawk@lemmy.ca 5 days ago
They don’t. Outside of the lab, they just recalibrate and call 95% “100”.
jinwk00@sh.itjust.works 6 days ago
Some people who are like “I bought 100% of my product so I shall use 100%”