Comment on Voron 2.4R2 vs. Trident
n3cr0@lemmy.world 7 months ago
In theory, the V2 can print a little faster, due to the low center of gravity on the first layers.
However, the fixed gantry height on the Trident makes it possible to install a fixed part cooling, a lighter print head and go even faster.
DreadPotato@sopuli.xyz 7 months ago
I’m a little bit in favour of the Trident. Mostly due to a simpler construction, I would assume there are fewer things I can mess up.
n3cr0@lemmy.world 7 months ago
Agreed. I’m not a V2 owner, but I built a Trident. The V2 is a little overhyped, IMHO.
In the end, it’s just a matter of your own personal taste though. If you want a highly aesthetic printer with complex mechanics, go for the V2. If you like to keep it simpler without sacrificing much, go with the Trident.
If you are fine with a smaller device, the V0 may be the right choice. You could reinforce the frame and do a few other mods to achieve insane (yet experimental) print speeds. 1500 mm/s is doable.
morbidcactus@lemmy.ca 7 months ago
Both are solid choices, you won’t be upset either way, I was 50/50 on both but decided to do the v2 for 350x350 print area. I have an enclosed mk3s that I use as well, Image I was putting together a buildtak surface (which I swear by for abs and nylon) for my mk3s and snapped this photo to compare print area size. I still want to do a trident (and maybe convert my mk3s to a switchwire) but I’d build it to match the MK3s wrt bed size and I’d totally consider a bowden extruder.
All that said, it is markedly faster than the mk3s and I’m definitely no where near pushing it to its limits. There’s a lot to build but I would call it difficult, racking the gantry and belt tensioning being the parts I spent the longest time on. I limit to 24 mm^3/s even though I could go faster, it still just absolutely flies with something like a 0.8mm nozzle. My only other headsup is that modding it is addicting, I’ve thrown on titanium backers and a kinematic mount for the bed, have a whole bunch of other ones in the pipe as well.
DreadPotato@sopuli.xyz 7 months ago
Magic Phoenix actually sells a trident kit with 350x350 build plate, with 250mm Z-axis build size.
morbidcactus@lemmy.ca 7 months ago
Big thing for me to do a prusa-sized trident would be the ability to share surfaces between it and my mk3s. 350^2 is nice, I don’t fill it all that often but it’s nice to have the ability to print larger objects.