This was my first thought. This looks like wobbling to me. Also, sometimes the slicer isnt that great at generating gcode.
Comment on What could be causing this on my new Elegoo CC2?
EchoCranium@lemmy.zip 4 days ago
Is your printer set up on a good, solid countertop? If it rests on something that has any wobble, like a folding table, it can translate into poor prints. The higher off the build plate the print goes, and the faster you run the printer, the part will wiggle a bit without a solid mount. Also make sure all the frame screws are tight.
JoShmoe@ani.social 4 days ago
BigDanishGuy@sh.itjust.works 3 days ago
We had a bunch of cheapo creality printers on wheeled tables at work. Some of the printers did something similar, so the wobbling was my prime suspect. But there was no correlation between fail and placement. It was printer specific.
Turned out to be issues with the z-axis screw and stabilizers. A good cleaning and, I seem to remember, a new bushing, was all it took.