Comment on xkcd #2848: Breaker box

robdor@lemmynsfw.com ⁨8⁩ ⁨months⁩ ago

• Speculater@lemmy.world ⁨8⁩ ⁨months⁩ ago

  “Room 1, Room 2, Zone, Range/Kitchen, Bath, ECT, Hi-Lo”

  source

  • echodot@feddit.uk ⁨8⁩ ⁨months⁩ ago

    In my house I have bathroom one, bathroom two, fan, kitchen, outlets, living room, L outlets, stove, kitchen outlets two, hall, upstairs, bedroom 1, bedroom two 2, bedroom one outlets, bedroom 2 outlets, outside.

    I only have one bathroom, and I don’t have a fan in any room so God knows what that controls.

    source

    • tooclose104@lemmy.ca ⁨8⁩ ⁨months⁩ ago

      I’m betting your house used to have a 2nd bath or was going to get one but was abandoned. The fan was likely the bathroom 2 or possibly a range hood.

      All brown wires is definitely what’s incorrect. Hot, neutral and ground should be easily identified at a glance (black or red for hot, white for neutral, green or bare copper for ground where I am). I’ve only ever seen brown sheathing on older fabric or paper insulated wiring.

      I am not an electrician and this isn’t advice.

      source

      • echodot@feddit.uk ⁨8⁩ ⁨months⁩ ago

        Where I am brown is live. So they’re all live wires apparently.

        The house was built in the early 1920s so I’m not surprised that it’s weird. It was built before homes really had electricity or indoor plumbing so the wiring and bathroom were added after the fact. Combined with the fact that the previous owner did a lot of DIY and weren’t very good at it.

        source
  • Ehoalid@lemmynsfw.com ⁨8⁩ ⁨months⁩ ago

    We had one labeled “tv”

    When we took ownership, there was no TV in the house, but not even a wall mount or evidence an old mount.

    source