Comment on Options for remote Wake-on-lan. Or I guess wake on WAN.
pineapple@lemmy.ml 1 day agoThat is a lot of money for me, especially if all I need it to do is simulate the on button. Surely there is some really cheap arm based device that has an ethernet port and can therefore send WOL signals.
TeddE@lemmy.world 1 day ago
I’m not sure what to tell ya. A cheap ARM device is the CanaKit 2GB Raspberry Pi 4 starter kit costs $110, but the JetKVM I recommended above including the ATX adapter is also $110
www.amazon.com/…/B07V2B4W63/
www.wisdpi.com/products/jetkvm
www.wisdpi.com/products/atx-extension-board
The only setup I can imagine that’s technically cheaper is an esp32 flashed with firmware, as discussed by another user (you already replied to it): lemmy.world/comment/20842145
But the esp32 (regardless of if you use a wire to simulate a button press, or have the device generate the WoL packet) is gonna be a pain to setup and flash by comparison to the other options.
If you already have a pi, it just needs to be flashed with Raspbian and install the app etherwake ‘sudo apt-get install etherwake’ and run it with ‘sudo etherwake [target MAC]’.