Comment on Open Printer is a fully open-source inkjet with DRM-free ink and no subscriptions
utopiah@lemmy.world 17 hours agoOpen source is specifically about the code, not the hardware, even less manufacturing. OSHW is about the hardware and has specific requirements in order to get the label and ID, e.g certification.oshwa.org/de000008.html and process certification.oshwa.org/process.html
So which part is proprietary exactly? In theory as they sell via CrowdSupply www.crowdsupply.com/apply it should be both OSHW and open source but I didn’t dig.
RobotToaster@mander.xyz 17 hours ago
It states the code and files will be CC-NC licensed, which isn’t open source.
RampantParanoia2365@lemmy.world 8 hours ago
So a closed open printer. I mean, is it at least, like, see-thru? I don’t get the name.
utopiah@lemmy.world 17 hours ago
Thanks, I just checked www.crowdsupply.com/open-tools/open-printer and its says “Open Printer will use the Creative Commons BY-NC-SA 4.0 license for all of its files, including electronics and mechanical design files, firmware code, and the bill of materials.” so I don’t think that’s related to the source code but rather the resulting binary of the built firmware.
The latest CrowdSupply project I bought was the PGB-1 and they did realize their firmware source code github.com/wee-noise-makers/WNM-PGB1-firmware/ and as GPL3 so I assume they will clarify that before starting the crowd funding campaign. I don’t think they can, even if they wanted to, have a CS project without releasing the source code.