Comment on Got my moneys worth..

renard_roux@lemmy.world ⁨4⁩ ⁨weeks⁩ ago

• Kanzar@sh.itjust.works ⁨4⁩ ⁨weeks⁩ ago

  Looks like a filament runout sensor, and there is a tiny tiny little bit of extra filament sticking out the top right. If the print had needed a little bit more filament, it would have pulled through the sensor and the machine would have reported it had run out of filament and paused the print.

  Essentially flying really fucking close to the sun and somehow making it by the skin of their teeth.

  source

  • TerraRoot@sh.itjust.works ⁨4⁩ ⁨weeks⁩ ago

    Skill baby! /Joking, pure luck

    source
  • renard_roux@lemmy.world ⁨3⁩ ⁨weeks⁩ ago

    Perfect, thank you! 😃👍

    source
• Test_Tickles@lemmy.world ⁨4⁩ ⁨weeks⁩ ago

  I have 2 3d printers and I don’t know either.

  source

  • renard_roux@lemmy.world ⁨3⁩ ⁨weeks⁩ ago

    Thank you for making me feel less stupid 😊❤️

    source
• MysteriousSophon21@lemmy.world ⁨4⁩ ⁨weeks⁩ ago

  It’s a filament runout sensor and OP literally used every last millimeter of their filament spool - like driving your car until the gas light comes on and then making it to the gas station with fumes to spare lol.

  source

  • renard_roux@lemmy.world ⁨3⁩ ⁨weeks⁩ ago

    May you be touched by His Noodly Appendage ❤️

    source
• Voyajer@lemmy.world ⁨4⁩ ⁨weeks⁩ ago

  It’s a filament runout sensor. It’s a limit switch that will pause the print if it detects there isn’t enough filament to continue so that you can feed in a new spool without having to watch it the whole time.

  source

  • renard_roux@lemmy.world ⁨3⁩ ⁨weeks⁩ ago

    Thank you! 😃👌

    source