Comment on Ancient filament, salvageable?
Imgonnatrythis@sh.itjust.works 1 week ago
Assume you tried unraveling to deeper layers? If it’s brittle beyond the surface layer in the spool I think it’s toast. Would be interested to hear the trick if I’m wrong.
SkyezOpen@lemmy.world 1 week ago
There’s probably only 150g or less on the spool so I did not unravel it. After the 12 hour bake I gave the very end a bend and it snapped like a twig. It’s running at 55c and 15% humidity right now so here’s hoping. If it’s screwed it’s not the worst thing ever, but I have nearly 1kg left of old ABS as well and I would be sad if I couldn’t save it.
AnyOldName3@lemmy.world 1 week ago
A trick is to weigh the filament before you start drying it and then weigh it again every few hours to see if it’s stopped getting lighter. If it’s been hours since it lost a single gram, then it’s probably close enough to as dry as it’s going to get, and if it still doesn’t behave, then there must be a second problem.