Comment on best print farm 3d-printer for PETG?
Blue_Morpho@lemmy.world 1 week agoThis is exactly why.
To be fair, the internet is full of complaints that the P1S has problems with layer 1 too.
Before the current P1S sale it was $600 for a Anycubic with ams vs $1000 for a P1S with AMS. But what got me to get the Anycubic was they haven’t locked users out of Orca slicer and forced cloud like Bambu. Anycubic has cloud features if you want it but you aren’t forced.
EmilieEvans@lemmy.ml 1 week ago
Blue_Morpho@lemmy.world 1 week ago
That’s like saying a Toyota isn’t a finished product compared to a BMW. The Anycubic works and isn’t locked down to their cloud service. You can even install open source firmware. The S1 AMS does filament drying that the p1S doesn’t do without the pro AMS.
I agree that Anycubic should sell nozzles but 3rd party nozzles are available.
Like I said there’s a temporary sale that makes the P1S a great value. The S1 is not $50-$100 cheaper. It was $1000 vs $650. Now it’s $700 vs $450.
EmilieEvans@lemmy.ml 1 week ago
Blue_Morpho@lemmy.world 1 week ago
The Anycubic has presets for .4 and .6 in brass or hardened steel. It’s only missing .2.
You can’t claim the S1 is incomplete for not having a .2 nozzle presets and then turn around and say that a built in filament dryer doesn’t matter when Bambu made it a pro feature. Especially when .4 is what you get out of the box from Bambu and .2 requires modifying your printer by swapping the hot end.
Where? I see 800€ everywhere.
And where I go after Bambu is what you didn’t mention: locked down firmware and no alternative slicer.