Comment on Experience combining 3D printing with laser?
CameronDev@programming.dev 1 hour agoIf all you want to do is engrave plastic, look at the the cheap diode lasers. They’ll easily engrave plastic. Make sure you ventilate the area, and be very cautious about the lasers. They will blind you instantly.
AliasVortex@lemmy.world 1 hour ago
Oh that’s perfect! I’d need to do more than a 10 minute skim (since Creality kinda sucks), but something like the Creality Falcon A1C looks like something much more my speed (and budget).
CameronDev@programming.dev 1 hour ago
I have a two trees tts-55pro, its cheaper, but no enclosure.
I would strongly recommend not relying on the enclosure anyway though, and make sure the glasses are actually capable.
I tested my glasses by putting them between the laser and a sheet of paper, and ran the laser at full power. If the paper is clean, its a good sign. Does mean my glasses have a big burn on the lens in front of my pupil though :D
I start my jobs and get as far away as possible, just to be safe.