woefkardoes
@woefkardoes@lemmy.world
- Comment on The first EV with a lithium-free sodium battery hits the road in January 10 months ago:
Or you could just use all of the space for a sodium battery and fully charge it as it won’t need long term storage in that state.
- Comment on Has google stopped working for finding anything? 10 months ago:
The search engine makes the rules for what they deem important in finding the correct results. SEO is the practice of optimising of a web site to best get your site on the top of the list. All the painful stories about grandmothers and long lost lovers at the top of recipes are to achieve better SEO and a good example of how SEO made the internet worse.
- Comment on The first EV with a lithium-free sodium battery hits the road in January 10 months ago:
Lithium batteries dont like being stored fully charged they will degrade over time.
- Comment on Help with stringing after shifting to Klipper 1 year ago:
Its a balancing act so if you are only upping the temperature to get higher flow but not the speeds to use that higher flow then there will be some issues. Each filament also has different temperature and flow characteristics so just because the new filament works with the current settings doesn’t mean the old filament was junk.
- Comment on Drinks company appoints AI robot as 'experimental CEO' - The humanoid-robot CEO of a drinks company says it doesn't have weekends and is 'always on 24/7' 1 year ago:
Knowing how lazy people are I’m betting a lot of the AI’s calls are implemented. Only the really out there ones will get dropped.
- Comment on Where to start with a Volcano hotend? 1 year ago:
The volcano was made for high volume prints and has a bigger melt zone. Ideally it’s best for bigger nozzles, high layer hights and faster printing.
If you want to print small and detail a normal e3d or other hotend gives you better control. For smaller characters you can use a standard hotend with a 0.3mm nozzle and switch on arachnid or similar in your slicer. That will give you pretty good results provided your cooling is good.
- Comment on Where to start with a Volcano hotend? 1 year ago:
To be honest the Volcano HE is the wrong thing for printing small detail like a DnD character. If you do all the calibrations it can print quite well but will never have the control thats needed for high detail prints. Your best bet is to have an extruder setup that makes it easy to change out the HE. I run both the volcano and normal E3D v6 and swop them out when needed with a EVA extruder.
- Comment on Looking for OpenSCAD tips for my RC wing designer 1 year ago:
Thanks I’ll give that a try. I also found another post on here about the Manifold engine that’s way faster. Its only in the dev releases at the moment and the under preferences/features/manifold
- Comment on Stanford researchers find Mastodon has a massive child abuse material problem 1 year ago:
Somewhere we went from finding those who do wrong and punishing them to censor everything because everyone is bad.
- Submitted 1 year ago to 3dprinting@lemmy.world | 2 comments