Looking to move up from Neptune 2

⁨12⁩ ⁨likes⁩

Submitted ⁨⁨8⁩ ⁨months⁩ ago⁩ by ⁨GlitzyArmrest@lemmy.world⁩ to ⁨3dprinting@lemmy.world⁩

I think it’s finally upgrade time. While I love my Neptune 2, it definitely has its issues.

Ideally, my next printer would have:

Built-in auto leveling, so I don’t have to install a BL Touch
An enclosure
Be slightly larger than the Neptune 2
Open source firmware
OctoPrint support

I was looking at the Prusa MK4, but it seems like a high price for what you get. Any recommendations?

source

Comments

Sort:hotnew top

ThatoneNB23@lemmy.blahaj.zone ⁨8⁩ ⁨months⁩ ago
You should probably get the Neptune 4 pro it has a fully open source software with klipper and you can install octo everywhere.

source
- GlitzyArmrest@lemmy.world ⁨8⁩ ⁨months⁩ ago
  Do you know how well the auto leveling works?
  
  source
EmilieEvans@lemmy.ml ⁨8⁩ ⁨months⁩ ago
Are you looking forward to using it commercially?

Budget is Prusa MK4 price class (1000€)?

source
- GlitzyArmrest@lemmy.world ⁨8⁩ ⁨months⁩ ago
  I probably won’t be going for commercial use, just hobby stuff mainly. It would be neat to do some nylon stuff but that’s probably as crazy as I’d get.
  
  But yes, ideally my budget is $450-1200 (wide I know, but I’d like to explore my options).
  
  source
  - EmilieEvans@lemmy.ml ⁨8⁩ ⁨months⁩ ago
    I don’t think the MK4 is a good value in this case. You are already familiar with setting up and maintaining a budget printer as such it just works of Prusa isn’t as critical.
    
    The answer might be your current printer: Octoprint and opensoucre are possible, bed leveling is build in, enclosure can be build but not ideal for bed slinger and size upgrade is the only point not feasible.
    
    What are you looking for if this isn’t an option?
    
    Enclosure -> coreXY, etc. | no bed slinger
    
    OpenSource -> no BambuLab P1S
    
    OctoPrint -> this is rough. Most printers ship with Klipper. Maybe a DIY-kit so you could choose.
    
    larger than neptune 2 -> larger than 220x220x250mm
    
    pre-built options?
    
    $400: Kinggroon KLP1: smaller (220x220mm), no Octoprint
    
    $600 FLASHFORGE Adventurer 5M Pro: no OctoPrint (klipper), identical printvolume and only klipper part of the firmware is opensource
    
    $600 creality K1: no OctoPrint, identical printvolume
    
    $700 Qidi Tech X-Plus 3: no Octoprint
    
    $900 Creality K1 max: no OctoPrint
    
    if you are lucky and max out the budget a used E3D tool changer could be possible (don’t know if Duet 2 [reprap firmware] is compatible with OctoPrint)
    
    DIY-kits (most if not all of them are $1000+)?
    
    Voron
    
    VzBoT
    
    RatRig v-core
    
    HevROT
    
    BLV mgn cube
    
    source
tagginator@utter.online [bot] ⁨8⁩ ⁨months⁩ ago
New Lemmy Post: Looking to move up from Neptune 2 (https://lemmy.world/post/13177600)
Tagging: #3dprinting
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
source