In other news, if you try to upload a file named uncalibrated_example.stl to Thingiverse, it fails with no error message, because somewhere they have a pr0n filter searching for rated*x.
Cool!
Sandpaper Adapter for Oscillating Multitool
Submitted 8 months ago by p1mrx@sh.itjust.works to 3dprinting@lemmy.world
https://www.thingiverse.com/thing:6083263
Comments
Anticorp@lemmy.world 8 months ago
Magrath@lemmy.ca 8 months ago
What material did you print this in? Sanding generates heat pretty easily and may soften some materials. I’m curious of your experience with that as you’ve given me some ideas for sanding jigs.
p1mrx@sh.itjust.works 8 months ago
PLA, but I’ve only used it for sanding small models so heat wasn’t an issue. PETG should be more heat resistant.
Patches@sh.itjust.works 8 months ago
I don’t know how to tell you this but this already exists. Get a Oscillating Multi tool pack at the store and it comes in all of them. I have three different ones.
p1mrx@sh.itjust.works 8 months ago
Yeah, but those sanding pads cost more than generic sandpaper.
j4k3@lemmy.world 8 months ago
That is interesting. I’m professionally curious about the drive mechanism for the oscillation pattern on these now. As a former auto body shop owner and painter, I would not expect this to be free of mechanical error like a high quality pneumatic dual action sander, but it is an interesting idea. In fact I can imagine taking this to another level and creating a thin sanding blade like design with Emory paper, to use in very tight slots.
ShepherdPie@midwest.social 8 months ago
You can buy these from Dewalt with triangular shaped velcro backed sanding pads. I used one to refinish a crappy bedside table during covid and it did leave a lot of weird sanding marks (especially if the paper picks up any debris) but it does work. It’s probably better suited for small surfaces that aren’t flat.
aard@kyu.de 8 months ago
Bosch has a bunch that are quite useful for sanding in corners: boschtools.com/…/sanding-polishing-43817-ocs-ac/
p1mrx@sh.itjust.works 8 months ago
Does mechanical error actually matter when using sandpaper? It seems like most of the error comes from holding the tool with your hands.
j4k3@lemmy.world 8 months ago
It does matter for automotive-class perfection. You will have hot spots develop that dig deeper than the rest of the surface. We are talking about mirror gloss perfection though. You are likely not working on a project of this scale/class.
Patterns can emerge from resonant frequencies (www.youtube.com/watch?v=wvJAgrUBF4w). The dual action of a “DA” sander is made to cancel out the resonance.