Submitted 11 months ago by DreadPotato@sopuli.xyz to 3dprinting@lemmy.world
I wanted to print a temperature tower, but the custom Gcode entered in prusa slicer doesn’t seem to actually change the temperature of the nozzle? It just uses the temperature that’s configured on “other layers” under the filament tab.
I’m attempting gaaZolee’s temperature tower, using the custom Gcode supplied with it, in the “before layer change” part of custom Gcode in prusa slicer.
The instructions in the link say that you need to configure your slicer to execute one of the two options of scripts described, before layer change
Yeah, and i put the script in to the “before layer change” section of custom Gcode. As I understood it, the custom Gcode tab is were these thing go in prusaslicer?
B0rax@feddit.de 11 months ago
Have you looked in the generated g-Code? Is it actually there on layer change?
DreadPotato@sopuli.xyz 11 months ago
I tried a different tower from the prusa website, with similar Gcode (but not identical) for layer change, and that worked just fine. So I’m thinking something is messed up in the code example of the other.
B0rax@feddit.de 11 months ago
Again, look in the generated g-Code. Just open it with a normal text editor and search for the Z value where you expect a change. See if it there.