Submitted 11 months ago by scrubbles@poptalk.scrubbles.tech to selfhosted@lemmy.world
Hey folks, I’m at my wits end. I’ve been screwing with proxmox for years now, but I’m at a tipping point. I’ve just used consumer SSDs in it to run my VMs off of - but I just realized after a dozen or so crashes over the last week that I think the SSDs are the culprit. (Really, really terrible write speeds leading to kernel crashes I believe).
I’ve never gotten an enterprise SSD, if that’s even what I need. Any recommendations? New? Used? Brands?
Appreciate it
SSDs often need firmware upgrades.
Sadly for consumer SSDs the upgrades are not so easy to do on Linux.
Other than that you are unlikely to really need anything other than higher quality consumer SSDs for homeserver needs.
Even the slowest SSD write speeds should be faster than an HDD, and those have been running systems perfectly fine for decades. I’ve never used enterprise SSDs (usually one little consumer SSD, or even USB, for boot/cache and a bunch of HDDs for storage) and I’ve never had a problem.
What kind of hardware are you using?
Decades? Like before 2004 :-p
To be fair though, old SSDs were usually single cell (but without trim?) so maybe really good quality.
I got an illegally cheap 256GB one for my 3770K for, not 320€ but like less than half, still goes strong…
I’d love sticking a bunch of cheap SSD & maybe HD in a mega secure “drive” but seems there is always some other single point of failure like mobo, remembering the setup etc.
Currently a few samsung drives. I thought I’d be smart and zfs them together for proxmox, but that hasn’t been working well. Maybe that’s the issue and I just need to split them, I just liked the idea of a lot of storage split up, and that may give me even faster reads/writes. It’s been nothing but a pain though. Hell maybe one of them failed and I haven’t even noticed.
What are you using for a drive controller?
I use mostly Samsung, SK Hynix, Micron and SanDisk. For bulk storage it doesn’t really matter which of those you pick but for fast storage you’ll want to be sure the drive offers PLP.
Go hit up fleaBay and see what’s available in the way of enterprise drives in the size you need then google the model numbers and check out the datasheets. Once you know what each drive is capable of you can decide which to buy. I usually try to buy 3 dwpd models for VM storage and 1.3 dwpd for bulk, you might prefer to focus on IOPS over endurance it’ll depend on your application.
When looking at the drives, check the “disk writes per year”, as that will give an estimate of what the vendor thinks the life will be.
Seagate brands some good ones. I had a few that went years and none failed. Samsung makes some PCI monsters which are likely overkill.
I would only get new and register then ASAP for the warranty, or cheap from a trusted friend.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
| Fewer Letters | More Letters |
|---|---|
| NVMe | Non-Volatile Memory Express interface for mass storage |
| SATA | Serial AT Attachment interface for mass storage |
| SSD | Solid State Drive mass storage |
[Thread #323 for this sub, first seen 1st Dec 2023, 20:25] [FAQ] [Full list] [Contact] [Source code]
You can used Samsung 22110 1TB NVME Drives for $25-$35 and they can be an excellent choice despite the used flash
Where are you finding then for $25-$35? Ebay has them going for $70+
They admittedly seem to have gone up in price since I last looked, but here is a listing for only $40
empireOfLove@lemmy.one 11 months ago
Really. Anything branded from Samsung or Crucial(Micron) is going to be fine. They are the top producers of NAND, produce high quality products, and stand behind warranties. But you are gonna pay out the nose for the privilege.
You might just be buying lower quality consumer SSD’s though, since even they should be able to handle a surprising amount of abuse.
scrubbles@poptalk.scrubbles.tech 11 months ago
How do you know you’re getting higher quality? When you’re looking at them they all seem the same
doeknius_gloek@feddit.de 11 months ago
I recently upgraded three of my proxmox hosts with SSDs to make use of ceph. While researching I faced the same question - everyone said you need an enterprise SSD, or ceph would eat it alive. The feature that apparently matters the most in my case is Power Loss Protection (PLP). It’s not even primarily needed to protect from an possible outage, but it forces sync writes instead of relying on a cache for performance.
There are some SSDs marketed for usage in data centers, these are generally enterprisey. Often they are classified for “Mixed Use” (read and write) or “Read Intensive”. Other interesting metrics are the Drive Writes Per Day (DWPD) and obviously TBW and IOPS.
At the end I went with used Samsung PM883.
But before you fall into this rabbit hole, you might check if you really need an enterprise SSD. If all you’re doing is running a few vms in a homelab, I would expect consumer SSDs to work just fine.
seaQueue@lemmy.world 11 months ago
Read the data sheets.
You’re mostly going to be concerned with IOPS and endurance for VM hosting.
MangoPenguin@lemmy.blahaj.zone 11 months ago
Endurance rating in TBW or PBW is the main indicator I look for. That and a DRAM cache.