ISP put me behind NAT

Submitted ⁨⁨1⁩ ⁨year⁩ ago⁩ by ⁨kokesh@lemmy.world⁩ to ⁨selfhosted@lemmy.world⁩

I’m connected via a 4G modem. Got this setup about 3 years ago. In the beginning it was enough to look for the public IP (what’s my IP). The modem showed some sort of private ip in the ui. I’m running stuff at home (Homeassistant, Gitea,) and bought a domain and pointed it to my home IP via Cloudflare. After some time I’ve noticed my modem shows the public IP also internally. For about 2 years now it ran flawlessly, the IP changed from time to time, but not really more than once in several weeks. For about a week all stopped working and the modem shows IP 100.xxxx and outside 85.something I guess I’m behind NAT now. Normal port forwarding on the modem is useless now. Is it possible to open the ports via UPNP? I’ve tried via miniupnp from my Ubuntu server, but it just throws an error.

upnpc -a ifconfig enp1s0| grep “inet addr” | cut -d : -f 2 | cut -d " " -f 1 22 22 TCP

Can I use this to somehow open the ports via UPNP on my modem and bypass the blocking? I can’t even OpenVPN to my modem anymore.

source

Comments

Sort:hotnew top

jbloggs777@discuss.tchncs.de ⁨1⁩ ⁨year⁩ ago
Welcome to the world of Carrier Grade NAT. 100.64.0.0/10 is reserved for this.

If you are lucky, you also have an IPv6 address. The catch is you need IPv6 on the client-side too.

A VPS or similar running wireguard and a proxy might bridge the gap.

It might also be possible to ask your provider for some port forwarding. Probably not, but check anyway.

Good luck!

source

Decronym@lemmy.decronym.xyz ⁨1⁩ ⁨year⁩ ago

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

Fewer Letters	More Letters
HTTP	Hypertext Transfer Protocol, the Web
IP	Internet Protocol
NAT	Network Address Translation
VPS	Virtual Private Server (opposed to shared hosting)
nginx	Popular HTTP server

[Thread #274 for this sub, first seen 11th Nov 2023, 18:30] [FAQ] [Full list] [Contact] [Source code]

source

lemann@lemmy.one ⁨1⁩ ⁨year⁩ ago
Neat bot!

source
alnitak@yiffit.net ⁨1⁩ ⁨year⁩ ago
Oh I love this idea for a bot! Well done!

source
vaselined@lemmy.world ⁨1⁩ ⁨year⁩ ago
Good bot

source

Dave@lemmy.nz ⁨1⁩ ⁨year⁩ ago
You’re already using cloudflare, so check out cloudflare tunnels. You install their software on your server which makes an outbound connection, bypassing the need for open ports or a public IP. Note this only does http traffic.

Another option is tail scale, which won’t make your site public but will let you access it remotely on devices you have their software/app on.

source
- farcaller@fstab.sh ⁨1⁩ ⁨year⁩ ago
  I’m actually not sure you can easily get tailscale up and running om such as a setup as it uses the same cgnat ip range.
  
  source
  - Dave@lemmy.nz ⁨1⁩ ⁨year⁩ ago
    This page says (at the very bottom):
    
    Tailscale can route its packets peer-to-peer over IPv4 or IPv6, with and without NAT, multi-layer NAT, or CGNAT in the path.
    
    source
    -> View More Comments
  - c10l@lemmy.world ⁨1⁩ ⁨year⁩ ago
    Been using Tailscale behind CG-NAT for years. It works wonderfully and very rarely needs to route through the DERP infrastructure - it’s almost always a P2P connection.
    
    source
  - Greg@lemmy.ca ⁨1⁩ ⁨year⁩ ago
    I haven’t had any issues running Tailscale and cloudflared on the same machines
    
    source
    -> View More Comments
clericc@feddit.de ⁨1⁩ ⁨year⁩ ago
i’ve been on CGNAT and just pointed my domain to my ipv6 address with no issues - every isp should hand out huge v6 subnets dedicated to you.

Since my v6 prefix is not stable, i use ddclient from my homeserver to update my domains AAAA record

source
- lemmyvore@feddit.nl ⁨1⁩ ⁨year⁩ ago
  Unfortunately IPv6 adoption is not universal. There will be parts of the internet that won’t be able to reach you at a 6-only address.
  
  source
  - kionite231@lemmy.ca ⁨1⁩ ⁨year⁩ ago
    Yup, my gemini capsule is suffering from it. :(
    
    source
- baldissara@lemmy.world ⁨1⁩ ⁨year⁩ ago
  I tried that and couldn’t make it work. My server was unable to receive any http requests. Then I tried doing some tweaking in my ISP router configuration but with no success, so far only cloudflare tunnel was the only solution I found
  
  source
  - clericc@feddit.de ⁨1⁩ ⁨year⁩ ago
    port forwarding in your router properly set up?
    
    source
    -> View More Comments
- EncryptKeeper@lemmy.world ⁨1⁩ ⁨year⁩ ago
  Every ISP except Verizon lol
  
  source
  - Still@programming.dev ⁨1⁩ ⁨year⁩ ago
    wdym except Verizon? I have a whole section of /56 for me in ipv6, tho the Verizon website is ipv4 only
    
    source
    -> View More Comments
nucleative@lemmy.world ⁨1⁩ ⁨year⁩ ago
A solid workaround is an ssh reverse tunnel with gateway ports enabled. You can do it for pennies with a cheap VPS.

With this option you open an ssh tunnel outbound and then you can connect back through it from the other side for whatever local services you want to run.

You first need a VPS with a public IP. Here’s a guide that explains it: howtogeek.com/…/what-is-reverse-ssh-tunneling-and…

Just remember to enable gateway ports in the VPS side sshd.conf and disable or adjust any firewall on the VPS so the internet can come in through the VPS ip address and tunnel back to your local system.

source
- Zeroxxx@lemmy.my.id ⁨1⁩ ⁨year⁩ ago
  That setup will yield off the chart latency if your VPS is not near your location 😱
  
  source
  - nucleative@lemmy.world ⁨1⁩ ⁨year⁩ ago
    For sure. If you really need to host thrn get the right package of internet services for that activity. If you need a fast fix for a small issue, this method gets around most ISP attempts to block hosting.
    
    source
- tal@lemmy.today ⁨1⁩ ⁨year⁩ ago
  While I use ssh tunneling to access systems on a temporary basis, usually http, some caveats:
  
  I don’t know of a daemon to set up locally that will re-establish tunnels on power loss and the like. Not technically-difficult, but something one probably wants if this is going to be how he’s gonna get at the system long-term rather than “I just need one-off access”.
  
  One other downside – the service that the user here is aiming to expose is apparently ssh. For me – reaching an http server – wrapping the connection for remote use is desirable. For him, it probably isn’t, as there’ll be two layers of encryption. Not the end of the world, but it’s a hit.
  
  source
  - kokesh@lemmy.world ⁨1⁩ ⁨year⁩ ago
    I need more ports to be exposed - I’m running secure DNS, Git on one port, Webmin on other, Jelllyfin (I can live without that on data), HTTP server on 800/443, Homeassistant 8123,… I also had 3389 open for remote desktop to my Windows machine, etc.
    
    source
    -> View More Comments
  - nucleative@lemmy.world ⁨1⁩ ⁨year⁩ ago
    For reestablishing the connection, use the wrapper ‘autossh’. It can be run from systemd so that it’ll auto start and restart as you command it.
    
    I have a couple instances using this that are absolutely rock solid after years.
    
    source
    -> View More Comments
rufus@lemmy.sdf.org ⁨1⁩ ⁨year⁩ ago
Have you reached out to your ISP to see if they can give you a dynamic public IP? I recently swapped to a new ISP that was using CGNAT but after contacting their support team with my use case, they were happy to set me up with a public IP so I could continue my self-hosting.

source
- nucleative@lemmy.world ⁨1⁩ ⁨year⁩ ago
  This. I had the same situation being put behind CGnat and told them my security webcam needs port forwarding from outside and they had me back to a public IP within minutes.
  
  source
  - nik282000@lemmy.ca ⁨1⁩ ⁨year⁩ ago
    ISPs in Canada usually include a clause in their TOS that explicitly prohibits selfhosting. Don’t move here, it sucks.
    
    source
    -> View More Comments
plague_sapiens@lemmy.world ⁨1⁩ ⁨year⁩ ago
Buy a cheap VPS, setup a Wireguard or OpenVPN server (wg-easy is quite nice). Then something like Nginx Prox Manager or plain nginx and expose your services over that.

source
- revv@lemmy.blahaj.zone ⁨1⁩ ⁨year⁩ ago
  I second this. I use a couple of dirt cheap VPSs from racknerd ($24/yr for 1 CPU/512Mb ram, but you can find coupons online to get them for $10/yr 1CPU/768mb ram) one does port forwarding over wireguard to my mail server so I can keep all my data in house, the other hosts an NGINX reverse proxy for all my web services. Works great. I use the reverse proxy for nextcloud and jellyfin for myself and 6 other users. Never had an issue. (Well, never had an issue I didn’t cause myself at any rate.)
  
  It’s a little harder to set up than some of the other suggestions, but it’s cheap, fully transparent to users, and doesn’t expose your home network to the outside world.
  
  source
  - Sharpiemarker@feddit.de ⁨1⁩ ⁨year⁩ ago
    
    (Well, never had an issue I didn’t cause myself at any rate.)
    
    As is tradition
    
    source
  - plague_sapiens@lemmy.world ⁨1⁩ ⁨year⁩ ago
    Netcup is my favourite hoster in the EU, but I live in DE. 2€/m for 2c, 2/4gb ram, lots of traffic. They have coupons from time to time or xmas/easter/… deals. The whole front- and backend works like a charm too. Upload your own isos/qcow images, download backups, KVM is awesomely implemented too. Sadly they don’t take crypto and you need a call verification or id via mail for your first purchase (understandable as a german hoster), besides that just wonderful :)
    
    source
- andrew@lemmy.stuart.fun ⁨1⁩ ⁨year⁩ ago
  Personally I would strongly recommend learning how to do all of this. And then abandoning it for tailscale or something similar once you know what they’re doing behind the scenes. It’s incredibly useful knowledge but it’s also nice to have so much of the process automated and best practices like key rotation done for you.
  
  source
  - plague_sapiens@lemmy.world ⁨1⁩ ⁨year⁩ ago
    Thanks for the tip. Haven’t used tailscale (or sth similar) yet. But I’ll take a look into it :)
    
    source
SiblingNoah@lemmy.world ⁨1⁩ ⁨year⁩ ago
You’re probably behind a CG-NAT. Look into establishing a tunnel, like via Cloudflare.

source
cmnybo@discuss.tchncs.de ⁨1⁩ ⁨year⁩ ago
I use a VPN that I setup on an Oracle free tier VPS when I need to access my stuff over IPv4. I also have IPv6, so I can connect directly when using 5G on my phone.

source
- skookumasfrig@sopuli.xyz ⁨1⁩ ⁨year⁩ ago
  Oracle is awesome in this one specific way. They suck in all other ways but this is really good.
  
  source
- kokesh@lemmy.world ⁨1⁩ ⁨year⁩ ago
  Can I setup a tunnel from my machine to the VPS and link it’s IP to my domain?
  
  source
  - cmnybo@discuss.tchncs.de ⁨1⁩ ⁨year⁩ ago
    Yes, if you setup port forwarding on the VPS and open the port in the firewall.
    
    source
DoomBot5@lemmy.world ⁨1⁩ ⁨year⁩ ago
Could always see if they offer a static IP. My ISP uses CG NAT and I just pay $10/month for a public static ip to bypass it.

source
- poVoq@slrpnk.net ⁨1⁩ ⁨year⁩ ago
  And if not I would cancle the contract with them as CGNAT is not an internet connection and we could not just accept this crap.
  
  source
  - Schmeckinger@feddit.de ⁨1⁩ ⁨year⁩ ago
    Good luck getting a non CGNAT connection here sithout paying for it. Also it’s not a breach of contract if it’s not in the contract…
    
    source
    -> View More Comments