You can literally build one. Here's a guide on doing it If you cannot find an https://commons.wikimedia.org/wiki/File:AppleDisplayConnector.jpg you can snip off a DVI-M1 header and with a Dremel or a small hammer "coax" the shield around the pins to agree with the mating end of an ADC. At least that's going to be "good enough".
The thing is the cable itself is passive. There's not special circuits or anything inside the cable. An ADC is just DVI + USB + Power for your monitor, that's it. It's just those wires all bundled up into a single cable. And technically speaking, if you're handy with desoldering, you can take a Cinema Display and do a breakout to DVI, USB, and a barrel plug and just ignore the bake your own cable.
The thing is, getting into vintage computing is a challenge. And likely these folks are hitting a new challenge to them, that for folks who've been doing this for a while have just come to embrace. Learning to solder, learning digital electronics, and lots of patience. Specifically to this group, it looks like they need a solution to the G4 Cube. There's multiple video cards out there that will fit into the machine, the Apple Radeon 7500 is one that would provide VGA ports that can go to modern monitors.
But I think what gets me is this part of their petition.
The ability to service and maintain our technology not only extends its lifespan but also reduces electronic waste. By enabling vintage Apple Macs to connect with modern monitors through the Belkin F2E9142-WHT ADC to DVI cable, we can prevent unnecessary disposal of these iconic machines.
Getting into vintage computing or arcade boxes or whatever, yeah "the ability to service and maintain" is paramount. But the onus is on us, the people doing the collecting, to service and maintain. I get that the Belkin cable provides a nice easy solution but ultimately, not to sound corny, we do these things not because they are easy but because they are hard to do.
And also, as I mentioned, this cable is passive so it's fairly easy compared to say the Nintendo GameCube's Component Video cable that had an active circuit inside the cable that took a lot of effort to eventually reverse engineer. But the point being is that vintage digital collecting is a very rough thing to get into, it takes a lot of love and really getting that enjoyment out of very complex challenges. It's one of those "I love it, but I don't recommend it" kind of things.
TimeSquirrel@kbin.social 1 year ago
That was funny.