I bought a 2nd-hand Lenovo USB-C PSU (ADLX65YLC3D) which indicates a range of voltages (20v, 15v, 9v, 5v) on the label. Tried to charge a few different bicycle lights but the charging indicators did not light up on any of them. I almost tossed it because the 2nd-hand market I bought from is definately dodgy. But then I tried to power a Rasberry Pi and it seems to work on that. So wtf? An a/c adapter either works or it doesn’t. What would cause this: works on some devices but not others? The Rasberry Pi needs 5v just as the bicycle lights. That is the default voltage for USB-c.
Most usb- c pd adapters wont put ouz any voltage on their own. the end device must tell the adapter what voltage they want via the cc pins. on the raspberry pi this is done via resistors between cc1 snd cc2 to get 5v. those pins are most likely unpopulated on your bycicle lights, so they get no power.
ThePantser@sh.itjust.works 2 days ago
The lights most likely do not have the extra circuitry to talk to the charger to negotiate voltages. Since it’s a charger that can change voltage as you stated then the device must be able to say “hey give me 5v”. You will need to use a dumber 5v only charger for those devices.
evenwicht@lemmy.sdf.org 2 days ago
What would be the meaning of a default voltage then? My understanding of USB PD is that 5v is a default, which I took to mean it would deliver 5v in the absence of a handshake.