Is anyone able to identify this fried component?

Comments

• chickenf622@sh.itjust.works ⁨2⁩ ⁨days⁩ ago

  I probably won’t be able to identify it, but including the name of the thing it’s a part of along with a model number would help.

  source

  • einfach_orangensaft@sh.itjust.works ⁨2⁩ ⁨days⁩ ago

    seams to be a inverter for LCD: LCD-Inverter TI-INV-CXA-L0624-VJL ( Mouser No: 810-CXA-L0624-VJL )

    source
  • leftascenter@jlai.lu ⁨2⁩ ⁨days⁩ ago

    Seems to be

    elecok.com/…/cxa-l0612A-vjl_pcu-p057b_inverter%2C…

    source
• einfach_orangensaft@sh.itjust.works ⁨2⁩ ⁨days⁩ ago

  sadly the part dosent seam to have a name on it even before it blew up:

  Image

  but its connected to pin1 and pin3 of the IC so maybe the datasheet can help you www.meditronik.com.pl/doc/…/cxa_l0624_vjl.pdf

  source
• Evoliddaw@lemmy.ca ⁨2⁩ ⁨days⁩ ago

  SMT Capacitor

  source
• Paragone@lemmy.world ⁨2⁩ ⁨days⁩ ago

  See the thick traces?

  It’s part of the power-section, which helps narrow-it-down, some…

  PCU-P057B board: duckduckgo.com/?t=fpas&q="PCU-P057B"&ia=web

  source
• m0darn@lemmy.ca ⁨2⁩ ⁨days⁩ ago

  Solid state relay? With like a heat sink on top?

  source
• SlightlyNormal@lemmy.world ⁨2⁩ ⁨days⁩ ago

  I think it’s some type of MLCC. If you look up variations of this inverter board, some have two MLCCs in the same location labeled C7 and C8. I know that some MLCCs can fail catastrophically if they crack and short circuit, may be what happened to yours.

  If it’s part of an LC circuit the capacity and ESR will be important to match, but if it’s only a filter capacitor, you can typically drop in a high value cap to replace it without worrying too much about matching the values. If course you’ll want it to be rated for the voltage and temp.

  source
• Delta_V@lemmy.world ⁨2⁩ ⁨days⁩ ago

  looks like a power inductor

  source
• leviticoh@poliverso.org ⁨2⁩ ⁨days⁩ ago

  @la508
  i found an image of a different version of the same product i think,
  it seems like this one has some red components that look like film capacitors in place of that blown smd thing

  power-systems.de/fileadmin/Med…

  source
• over_clox@lemmy.world ⁨2⁩ ⁨days⁩ ago

  I think this is some sort of surface mount fuse.

  Don’t quote me on that as fact though.

  source