Side grade advice

Submitted ⁨⁨1⁩ ⁨day⁩ ago⁩ by ⁨Foofighter@discuss.tchncs.de⁩ to ⁨selfhosted@lemmy.world⁩

So, I am running Proxmox on an old thinkpad (Intel I7 11th gen, 32 gb ram) to host home assistant, nextcloud, npm and jellyfin. I was just able to set up hardware acceleration with the iris xe driver on jellyfin and install the client on my TV, but replay struggles at 4k hdr content. I doubt that this is actually the CPU, but my LAN interface. Buying the laptop I didn’t notice that it doesn’t have an RJ45 socket so I have to use an USB-C adapter instead.

Additionally, I will definitely run into storage issues before getting anywhere near a reasonable movie database and adding more and more external usb drives does not seem a good idea.

I think I need a NAS. But looking at used prices of a decent 4bay device, makes me wonder if “sidegrading” my PC wouldn’t be a better option. I could buy a new mainboard, cpu and memory, install all HDDs in my current case, and move my current hardware to a new, smaller one.

Does that make sense? Or is it more likely that my hardware is just incorrectly configured and a NAS would make more sense? Or should I get a DAS and set up USB pass throughout? Or…? What’s your opinion?

source

Comments

Sort:hotnew top

lka1988@lemmy.dbzer0.com ⁨8⁩ ⁨hours⁩ ago
What hardware is your current PC running? Are you intending to replace the aforementioned Thinkpad with this PC? Or are they one and the same?

source
- Foofighter@discuss.tchncs.de ⁨5⁩ ⁨hours⁩ ago
  I use a ryzen 3600x and 5600 or 5700xt with 16gb of ram. Works fine for my day to day work. The Thinkpad runs proxmox.
  
  My idea was to get a new, smaller case to fit my mitx board and psu in and use the old one with a cpu which supports “all” codes, 32gb ram. The old case has enough space for everything I’ll ever need, but the question is, would it be worth the effort. With transcoding ticked off my issue list, my last remaining point is storage and the uncertainty, whether using usb-c connected, direct attached storage (DAS) systems to set up a fileserver is inherently problematic or not.
  
  I don’t understand ZFS and docker would yield a ton of chaos if i used it. Setting up shared network directories in a somewhat polished user interface seems more achievable for me without causing a bottle neck. But I had issues when I rebooted VMs / containers with usb pass throughout which took to long to recover. A dedicated NAS would mitigate that issue but would be more costly.
  
  At the moment, I am looking at a terramaster d5 DAS to give my file server a trial…
  
  source
autriyo@feddit.org ⁨1⁩ ⁨day⁩ ago
I once did a whole bunch of research looking into turning my old gaming laptop into a Nas/Homeserver.

And buying the supporting hardware to get more than the three SATA ports it had (mcpie adapter and SATA card and a power supply) would have been more jank and expensive than buying a used desktop in a big case and using that instead.

I’d say it does make sense, the only thing I lost is power efficiency, but I’m trying to not think too hard about that :D

With the right software most consumer hardware can be a decent server, although not having ECC ram kinda sucks. Usually most motherboards have enough SATA ports for a few drives and if not, just add a PCIE card that does.

source
cmnybo@discuss.tchncs.de ⁨1⁩ ⁨day⁩ ago
Run an iperf test to see if the ethernet adapter is working correctly. The speed tests on my USB ethernet adapter are almost identical to an integrated one as long as it’s connected to a USB 3 port.

source
Brkdncr@lemmy.world ⁨1⁩ ⁨day⁩ ago
What makes you think it’s the r usb-c adapter? Switch to wifi and see if there’s any difference. Try a 4k source that doesn’t need transcoding to confirm it’s not a hw acceleration issue.

source
- Foofighter@discuss.tchncs.de ⁨1⁩ ⁨day⁩ ago
  As proxmox does, to my knowledge, not natively support wifi, I’d rather not try it. Good idea regarding an alternative source. Any idea suggestion how if a) which codes might be supported by my tv b) find / generate a suitable file?
  
  source
  - Brkdncr@lemmy.world ⁨1⁩ ⁨day⁩ ago
    Jellyfin logs will tell you if it’s transcoding. If you have a dvd you can use handbrake to convert it to any format you want.
    
    If you stream to a different device and have the same issues and it’s also not transcoding then you can isolate the issue to your tv, network, or hypervisor.
    
    source
  - Bakkoda@sh.itjust.works ⁨1⁩ ⁨day⁩ ago
    Fyi my TVs all have 100mbit ports and I stream 4k content all the time. Larger files (LOTR 50gbish) can take a while to pre load when direct streaming but once they start it’s smooth and i can seek instantly.
    
    source
    -> View More Comments